chacon-rpi/emit/home_easy.c

#include <stdio.h>
#include <unistd.h>
#include <malloc.h>
#include <string.h>
#include <wiringPi.h>
#include "home_easy.h"
#include "buffer.h"
#include "utils.h"

unsigned int timings[5][2] = {
    {310, 310},  // bit 0
    {310, 1340}, // bit 1
    //{275, 275},  //  bit 0
    //{275, 1300}, //  bit 1
    {275, 9900},  //  start of data
    {275, 2675}, //  start of frame
    {275, 2675},  //  end of data
};

unsigned char homeEasyPinOut = 0;
unsigned char homeEasyPinIn = 2;


/**
 * Encode bits with HomeEasy encoding (1 => 10, 0 => 01)
 *
 * @param buffer the buffuer to encode
 *
 * @return new buffer
 * */
BYTE_BUFFER homeEasyEncode(BYTE_BUFFER *buffer)
{
    BYTE_BUFFER result = createByteBuffer();
    unsigned int i;
    for(i=0; i<buffer->size; i++) {
        pushWord(&result, encodeByte(buffer->data[i]));
    }
    return result;
}

/**
 * Decode bits with HomeEasy encoding (1 => 10, 0 => 01)
 *
 * @param buffer the buffuer to decode
 *
 * @return new buffer
 * */
BYTE_BUFFER homeEasyDecode(BYTE_BUFFER *buffer)
{
    BYTE_BUFFER result = createByteBuffer();
    unsigned short int word;
    unsigned char *byte = (unsigned char*)&word;
    unsigned int i;
    for(i=0; i<(buffer->size+1)/2; i++) {
        byte[1] = buffer->data[2*i];
        byte[0] = (2*i+1 < buffer->size ? buffer->data[2*i+1]:0);
        pushByte(&result, decodeByte(word));
    }
    return result;
}

/**
 * Decode a byte according to HomeEasy
 *
 * @param byte the byte to decode
 *
 * @return the decoded byte
 */
unsigned char decodeByte(unsigned short int word)
{
    unsigned char decodedChar=0;
    int j;
    int shift = 7;
    for(j=0x8000;j>0; j>>=2) {
	    decodedChar |= (((word & j) == j) ? 0x01 : 0x00) << shift;
		shift -=1;
    }
    return decodedChar;
}

/**
 * Encode a byte according to HomeEasy
 * 
 * @param byte the byte to encode
 * 
 * @return the encoded byte
 */
unsigned short int encodeByte(unsigned char byte)
{
    unsigned short int encodedChar=0;
    int j;
    int shift = 14;
    for(j=0x80;j>0; j>>=1) {
	      encodedChar |= (((byte & j) == j) ? 0x02 : 0x01) << shift;
	      shift -=2;
    }
    return encodedChar;
}

/**
 * Create a complete command according to Chacon protocole
 *
 * @param id command id (refer to your remote)
 * @param section button section ('A' | 'B'  | 'C'  | 'D'  | 'G')
 * @param nb button number(1, 2, 3, 4)
 * @param on boolean for on/off
 */
BYTE_BUFFER createHomeEasyCommand(unsigned char* id, char section, unsigned char nb, unsigned char on)
{
    unsigned char last = id[3] & 0xc0;
    BYTE_BUFFER command;
    char formatedSection = (section<='Z' ? section : section + 'A' - 'a');
    // adding global
    last |= (formatedSection == 'G' ? 0x20 : 0);
    // adding on/off
    last |= (on ? 0x10 : 0);
    // adding section
    last |= ((formatedSection == 'G' ? 0 : formatedSection - 'A') << 2) & 0x0c;
    // adding num
    last |= (formatedSection == 'G' ? 0 : nb-1) & 0x03;;
    //Preparing output buffer
    command = createByteBuffer();
    pushBytes(&command, id, 3);
    pushByte(&command, last);
    return command;
}

/**
 * Send a complete command according to Chacon protocole
 *
 * @param id command id (refer to your remote)
 * @param section button section ('A' | 'B'  | 'C'  | 'D'  | 'G')
 * @param nb button number(1, 2, 3, 4)
 * @param on boolean for on/off
 * @param repeat number of repeatition
 */
void sendHomeEasyCommand(unsigned char* id, char section, unsigned char nb, unsigned char on, unsigned char repeat)
{
	BYTE_BUFFER command;
	unsigned int i;
	command = createHomeEasyCommand(id, section, nb, on);
	sendHomeEasyBit(START_OF_DATA);
	sendHomeEasyBit(START_OF_FRAME);
	for(i=0; i<repeat; i++) {
		sendHomeEasyBytes(command);
		sendHomeEasyBit(END_OF_FRAME);
	}
}

/**
 * Configure the GPIO output pin
 *
 * @param pinNumber wiringPi pin number
 */
void setHomeEasyTransmittorPin(unsigned char pinNumber)
{
	homeEasyPinOut = pinNumber;
}

/**
 * read the GPIO output pin
 *
 * @return wiringPi pin number
 */
unsigned char getHomeEasyTransmittorPin()
{
	return homeEasyPinOut;
}

/**
 * Configure the GPIO input pin
 *
 * @param pinNumber wiringPi pin number
 */
void setHomeEasyReceptorPin(unsigned char pinNumber)
{
	homeEasyPinIn = pinNumber;
}

/**
 * read the GPIO input pin
 *
 * @return wiringPi pin number
 */
unsigned char getHomeEasyReceptorPin()
{
	return homeEasyPinIn;
}

/**
 * Init input/output
 *
 * @return status
 */
int initIO()
{
    int status;
    status = wiringPiSetup();
    if (status != -1) {
        printf("Setting up GPIO\n");
        pinMode(homeEasyPinIn, INPUT);
        pinMode(homeEasyPinOut, OUTPUT);
        scheduler_realtime();
    } else {
        printf("GPIO setup failed %d\n", status);
    }
    return status;
}

/**
 * Return to normal mode
 */
void closeIO()
{
    scheduler_standard();
}

/**
 * Send a bit to the RF transmitter
 * 
 * @param bit the bit to transmit (0 | 1 | TRIGGER0 | TRIGGER1 | END_OF_FRAME)
 */
void sendHomeEasyBit(unsigned char bit)
{
    digitalWrite(homeEasyPinOut, HIGH);
    delayMicroseconds(timings[bit][0]);
    digitalWrite(homeEasyPinOut, LOW);
    delayMicroseconds(timings[bit][1]);
    digitalWrite(homeEasyPinOut, HIGH);
}

/**
 * Send a byte to the RF transmitter
 * 
 * @param byte the byte to transmit
 */
void sendHomeEasyByte(unsigned char byte)
{
    int i;
    for(i=0x80;i>0; i>>=1) {
    	sendHomeEasyBit((byte & i) == i);
    }
}

/**
 * Send the content of a buffer to the RF transmitter
 *
 * @param buffer the buffer to transmit
 */
void sendHomeEasyBytes(BYTE_BUFFER buffer)
{
    unsigned int i;
    for(i=0; i<buffer.size; i++) {
        sendHomeEasyByte(buffer.data[i]);
    }
}

/**
 * Calculate the length of the frame
 *
 * @param data data to scan (each byte represent a bit)
 * @param high length of high level
 * @param low length of low level
 *
 * @return total length of the frame
 */
unsigned int frameSize(unsigned char* data, unsigned int* high, unsigned int* low)
{
    unsigned int i=0;
    if (high) *high = 0;
    if (data[i] == 1) {
        for(i=0; data[i]; i++) ;
        if (high) *high = i;
    }
    for(;  !data[i]; i++) ;
    if (low) *low = i - *high;
    return i;
}

/**
 * Reading data from GPIO
 *
 * @param samples number of samples to read
 * @param duration waiting time between samples
 *
 * @return buffer
 */
BYTE_BUFFER readData(unsigned long int samples, unsigned int duration)
{
    struct timeval* start;
    BYTE_BUFFER result;
    unsigned long int i;
    
    result = createByteBuffer();
    result.size = samples;
    result.data = (char*) realloc(result.data, samples);

    start = showTime(0);
    for(i=0; i<samples; i++) {
        result.data[i] = digitalRead(homeEasyPinIn);
        delayMicroseconds(duration);
    }
    showTime(start);
    return result;
}