Add schematics

Signed-off-by: ewft <bnj@ewft.org>

schematics/2015-06-13_06-11-57_Library.scr

@@ -0,0 +1,127 @@
+# Created by Ultra Librarian Lite 6.4.103 Copyright © 1999-2013
+# Ultra Librarian Demo Software, Accelerated-Designs Inc.
+
+Grid mil;
+Set Wire_Bend 2;
+
+
+Edit 'PDIP8_300MC.pac';
+Change Drill 39;
+Pad '1' Square 0 R0 (-300 300);
+Change Drill 39;
+Pad '2' Round 0 R0 (-300 200);
+Change Drill 39;
+Pad '3' Round 0 R0 (-300 100);
+Change Drill 39;
+Pad '4' Round 0 R0 (-300 0);
+Change Drill 39;
+Pad '5' Round 0 R0 (0 0);
+Change Drill 39;
+Pad '6' Round 0 R0 (0 100);
+Change Drill 39;
+Pad '7' Round 0 R0 (0 200);
+Change Drill 39;
+Pad '8' Round 0 R0 (0 300);
+Layer 51;
+Wire 6 (-10 341) (-10 350);
+Wire 6 (-10 241) (-10 259);
+Wire 6 (-10 141) (-10 159);
+Wire 6 (-10 41) (-10 59);
+Wire 6 (-290 -41) (-290 -50);
+Wire 6 (-290 -50) (-10 -50);
+Wire 6 (-10 -50) (-10 -41);
+Wire 6 (-10 350) (-290 350);
+Wire 6 (-290 350) (-290 343);
+Wire 6 (-290 257) (-290 241);
+Wire 6 (-290 159) (-290 141);
+Wire 6 (-290 59) (-290 41);
+Change Size 50;
+Change Ratio 6;
+Text '*' SR0 (-323 334);
+Layer 25;
+Wire 6 (-290 280) (-290 320);
+Wire 6 (-290 320) (-320 320);
+Wire 6 (-320 320) (-320 280);
+Wire 6 (-320 280) (-290 280);
+Wire 6 (-290 180) (-290 220);
+Wire 6 (-290 220) (-320 220);
+Wire 6 (-320 220) (-320 180);
+Wire 6 (-320 180) (-290 180);
+Wire 6 (-290 80) (-290 120);
+Wire 6 (-290 120) (-320 120);
+Wire 6 (-320 120) (-320 80);
+Wire 6 (-320 80) (-290 80);
+Wire 6 (-290 -20) (-290 20);
+Wire 6 (-290 20) (-320 19);
+Wire 6 (-320 19) (-320 -20);
+Wire 6 (-320 -20) (-290 -20);
+Wire 6 (-10 20) (-10 -20);
+Wire 6 (-10 -20) (20 -19);
+Wire 6 (20 -19) (20 20);
+Wire 6 (20 20) (-10 20);
+Wire 6 (-10 120) (-10 80);
+Wire 6 (-10 80) (20 81);
+Wire 6 (20 81) (19 120);
+Wire 6 (19 120) (-10 120);
+Wire 6 (-10 220) (-10 180);
+Wire 6 (-10 180) (19 180);
+Wire 6 (19 180) (19 220);
+Wire 6 (19 220) (-10 220);
+Wire 6 (-10 320) (-10 280);
+Wire 6 (-10 280) (19 280);
+Wire 6 (19 280) (19 320);
+Wire 6 (19 320) (-10 320);
+Wire 6 (-290 -50) (-10 -50);
+Wire 6 (-10 -50) (-10 350);
+Wire 6 (-10 350) (-290 350);
+Wire 6 (-290 350) (-290 -50);
+Change Size 50;
+Change Ratio 6;
+Text '*' SR0 (-323 334);
+Change Size 50;
+Change Ratio 6;
+Text '>NAME' SR0 (-263 125);
+Layer 27;
+Change Size 50;
+Change Ratio 6;
+Text '>VALUE' SR0 (-286 125);
+
+Edit 'MCP4161-XXXX/P.sym';
+Layer 94;
+Pin '*CS' Pas None Long R0 Both 0 (0 0);
+Pin 'SCK' Pas None Long R0 Both 0 (0 -100);
+Pin 'SDI/SDO' Pas None Long R0 Both 0 (0 -200);
+Pin 'VSS' Pas None Long R0 Both 0 (0 -300);
+Pin 'P0A' Pas None Long R180 Both 0 (1900 -300);
+Pin 'P0W' Pas None Long R180 Both 0 (1900 -200);
+Pin 'P0B' Pas None Long R180 Both 0 (1900 -100);
+Pin 'VDD' Pas None Long R180 Both 0 (1900 0);
+Wire 6 (300 200) (300 -500);
+Wire 6 (300 -500) (1600 -500);
+Wire 6 (1600 -500) (1600 200);
+Wire 6 (1600 200) (300 200);
+Layer 97;
+Layer 95;
+Change Size 82;
+Change Ratio 6;
+Text '>NAME' SR0 (764 359);
+Layer 96;
+Change Size 82;
+Change Ratio 6;
+Text '>VALUE' SR0 (727 259);
+
+Edit 'MCP4161-XXXX/P.dev';
+Prefix '';
+Description '';
+Value Off;
+Add MCP4161-XXXX/P 'A' Next  0 (0 0);
+Package 'PDIP8_300MC';
+Technology '';
+Connect 'A.*CS' '1';
+Connect 'A.SCK' '2';
+Connect 'A.SDI/SDO' '3';
+Connect 'A.VSS' '4';
+Connect 'A.P0A' '5';
+Connect 'A.P0W' '6';
+Connect 'A.P0B' '7';
+Connect 'A.VDD' '8';

schematics/Timelaps/eagle.epf

@@ -0,0 +1,357 @@
+[Eagle]
+Version="07 03 00"
+Platform="Linux"
+Serial="62191E841E-LSR-WLM-1EL"
+Globals="Globals"
+Desktop="Desktop"
+
+[Globals]
+AutoSaveProject=1
+UsedLibrary="/home/bnj/.eagle/lbr/19inch.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/40xx.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/41xx.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/45xx.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/74ac-logic.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/74ttl-din.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/74xx-eu.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/74xx-little-de.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/74xx-little-us.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/74xx-us.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/751xx.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/IQD-Frequency-Products.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/advanced-test-technologies.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/agilent-technologies.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/allegro.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/altera-cyclone-II.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/altera-cyclone-III.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/altera-stratix-iv.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/altera.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/am29-memory.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/amd-mach.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/amd.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/amis.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/analog-devices.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/aplus.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/ase.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/atmel.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/austriamicrosystems.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/avago.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/axis.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/battery.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/belton-engineering.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/burr-brown.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/busbar.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/buzzer.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/c-trimm.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/california-micro-devices.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/capacitor-wima.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/chipcard-siemens.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/cirrus-logic.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-3m.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-4ucon.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-amp-champ.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-amp-micromatch.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-amp-mt.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-amp-mt6.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-amp-quick.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-amp-te.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-amp.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-amphenol.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-avx.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-berg.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-bosch.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-chipcard-iso7816.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-coax.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-commcon.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-conrad.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-cpci.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-cui.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-cypressindustries.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-deutsch.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-dil.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-ebyelectro.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-elco.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-erni.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-faston.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-fci.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-friwo.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-garry.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-harting-h.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-harting-ml.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-harting-v.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-harting.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-hirose.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-hirschmann.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-jack.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-jae.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-jst.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-kycon.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-kyocera-elco.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-lemo.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-leotronics.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-lsta.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-lstb.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-lumberg.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-ml.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-molex.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-neutrik_ag.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-omron.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-panasonic.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-panduit.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-pc.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-pc104.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-254.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-3.81.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-350.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-500.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-508.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-762.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-me_max.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-mkds_5.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-phoenix-smkdsp.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-ptr500.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-pulse.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-rib.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-samtec.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-shallin.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-shiua-chyuan.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-stewart.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-stocko.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-subd.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-sullinselectronics.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-thomas-betts.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-tyco.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-tycoelectronics.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-vg.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-wago-500.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-wago-508.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-wago.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-wago255.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-weidmueller-sl35.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-wenzhou-yihua.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-xmultiple.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/con-yamaichi.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/crystal.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/csr.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/cypress.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/davicom.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/dc-dc-converter.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/dimensions.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/diode.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/discrete.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/display-hp.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/display-kingbright.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/display-lcd.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/docu-dummy.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/eagle-ltspice.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/ecl.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/em-microelectronic.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/etx-board.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/exar.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/fairchild-semic.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/farnell.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/fiber-optic-hp.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/fiber-optic-siemens.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/fifo.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/flexipanel.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/fox-electronics.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/frames.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/freescale.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/ftdichip.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/fujitsu.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/fuse.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/gennum.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/halo-electronics.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/heatsink.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/holes.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/holtek.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/ic-package.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/inductor-coilcraft.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/inductor-neosid.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/inductor-nkl.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/inductors.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/infineon-tricore.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/infineon.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/intersil-techwell.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/intersil.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/ir.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/isd.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/johanson-technology.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/jump-0r-smd.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/jumper.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/lantronix.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/lattice.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/lc-filter.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/led-7-segment.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/led-citizen-electronics.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/led-lumiled.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/led.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/lem.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/linear-technology.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/linear.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/linx.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/logo.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/lprs.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/lsi-computer-systems.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/lumiled.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/marks.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/maxim.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/maxstream.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/melexis.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/memory-hitachi.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/memory-idt.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/memory-micron.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/memory-motorola-dram.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/memory-nec.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/memory-samsung.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/memory-sram.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/memory.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/mems.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micrel.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-cyrod.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-fujitsu.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-harris.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-hitachi.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-infineon.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-intel.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-mc68000.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-motorola.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-philips.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-renesas.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-samsung.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micro-siemens.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/microchip.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micron.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/micronas.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/microphon.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/microwave.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/midori-sensor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/minicircuits.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/mitsubishi-semiconductor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/motorola-sensor-driver.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/murata-filter.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/murata-sensor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/nanotec.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/national-instruments.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/national-semiconductor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/nec-lqfp100-pack.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/nec.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/nrj-semiconductor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/omnivision.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/on-semiconductor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/opto-honeywell-3000.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/opto-honeywell-4000.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/opto-honeywell.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/opto-micro-linear.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/opto-trans-siemens.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/opto-transmittter-hp.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/opto-vishay.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/optocoupler.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/pal.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/philips-semiconductors.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/photo-elements.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/piher.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/pinhead.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/plcc-socket.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/pld-intel.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/plxtech.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/pot-vitrohm.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/pot-xicor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/pot.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/ptc-ntc.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/quantum-research-group.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/rcl.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/recom-international.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/rectifier.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/ref-packages-longpad.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/ref-packages.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/relay.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/renesas.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/resistor-bourns.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/resistor-dil.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/resistor-net.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/resistor-power.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/resistor-ruf.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/resistor-shunt.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/resistor-sil.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/resistor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/rf-micro-devices.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/rf-solutions.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/rohm.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/roundsolutions.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/semicon-smd-ipc.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/sensor-comus-group.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/sensor-heraeus.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/sensor-infratec.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/sharp.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/silabs.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/sim-technology.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/sipex.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/smd-ipc.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/smd-special.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/solomon-systech.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/solpad.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/speaker.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/special-drill.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/special.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/st-microelectronics.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/stm32xx.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/supertex.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/supply1.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/supply2.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/switch-alps.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/switch-coto.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/switch-dil.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/switch-misc.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/switch-omron.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/switch-raychem.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/switch-reed.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/switch.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/telcom.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/telecontrolli.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/telefunken.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/testpad.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/texas-sn55-sn75.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/texas.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/toshiba.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/traco-electronic.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/trafo-bei.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/trafo-hammondmfg.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/trafo-siemens.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/trafo-xicon.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/trafo.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/transformer-pulse.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/transistor-fet.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/transistor-neu-to92.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/transistor-npn.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/transistor-pnp.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/transistor-power.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/transistor-small-signal.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/transistor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/triac.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/trimble.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/tripas.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/u-blox.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/uln-udn.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/v-reg-micrel.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/v-reg.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/varistor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/wafer-scale-psd.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/wirepad.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/xicor.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/xilinx-virtex-v5.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/xilinx-xc18v.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/xilinx-xc9.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/xilinx-xcv.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/zetex.lbr"
+UsedLibrary="/home/bnj/.eagle/lbr/zilog.lbr"
+
+[Win_1]
+Type="Control Panel"
+Loc="0 0 599 399"
+State=1
+Number=0
+
+[Desktop]
+Screen="1920 1080"
+Window="Win_1"

schematics/Timelaps/schemas.brd

@@ -0,0 +1,644 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE eagle SYSTEM "eagle.dtd">
+<eagle version="7.3.0">
+<drawing>
+<settings>
+<setting alwaysvectorfont="no"/>
+<setting verticaltext="up"/>
+</settings>
+<grid distance="0.05" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.025" altunitdist="inch" altunit="inch"/>
+<layers>
+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
+<layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
+<layer number="43" name="vRestrict" color="2" fill="10" visible="yes" active="yes"/>
+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="90" name="Modules" color="5" fill="1" visible="no" active="no"/>
+<layer number="91" name="Nets" color="2" fill="1" visible="no" active="no"/>
+<layer number="92" name="Busses" color="1" fill="1" visible="no" active="no"/>
+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="no"/>
+<layer number="94" name="Symbols" color="4" fill="1" visible="no" active="no"/>
+<layer number="95" name="Names" color="7" fill="1" visible="no" active="no"/>
+<layer number="96" name="Values" color="7" fill="1" visible="no" active="no"/>
+<layer number="97" name="Info" color="7" fill="1" visible="no" active="no"/>
+<layer number="98" name="Guide" color="6" fill="1" visible="no" active="no"/>
+</layers>
+<board>
+<plain>
+<wire x1="0" y1="0" x2="100" y2="0" width="0" layer="20"/>
+<wire x1="100" y1="0" x2="100" y2="80" width="0" layer="20"/>
+<wire x1="100" y1="80" x2="0" y2="80" width="0" layer="20"/>
+<wire x1="0" y1="80" x2="0" y2="0" width="0" layer="20"/>
+</plain>
+<libraries>
+<library name="mcp4161">
+<packages>
+<package name="PDIP8_300MC">
+<pad name="1" x="-7.62" y="7.62" drill="0.9906" shape="square"/>
+<pad name="2" x="-7.62" y="5.08" drill="0.9906"/>
+<pad name="3" x="-7.62" y="2.54" drill="0.9906"/>
+<pad name="4" x="-7.62" y="0" drill="0.9906"/>
+<pad name="5" x="0" y="0" drill="0.9906"/>
+<pad name="6" x="0" y="2.54" drill="0.9906"/>
+<pad name="7" x="0" y="5.08" drill="0.9906"/>
+<pad name="8" x="0" y="7.62" drill="0.9906"/>
+<wire x1="-0.254" y1="8.6614" x2="-0.254" y2="8.89" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="6.1214" x2="-0.254" y2="6.5786" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="3.5814" x2="-0.254" y2="4.0386" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="1.0414" x2="-0.254" y2="1.4986" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="-1.0414" x2="-7.366" y2="-1.27" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="-1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="-1.27" x2="-0.254" y2="-1.0414" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="8.89" x2="-7.366" y2="8.89" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="8.89" x2="-7.366" y2="8.7122" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="6.5278" x2="-7.366" y2="6.1214" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="4.0386" x2="-7.366" y2="3.5814" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="1.4986" x2="-7.366" y2="1.0414" width="0.1524" layer="51"/>
+<text x="-8.2042" y="8.4836" size="1.27" layer="51" ratio="6" rot="SR0">*</text>
+<wire x1="-7.366" y1="7.112" x2="-7.366" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="8.128" x2="-8.128" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="8.128" x2="-8.128" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="7.112" x2="-7.366" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="4.572" x2="-7.366" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="5.588" x2="-8.128" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="5.588" x2="-8.128" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="4.572" x2="-7.366" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="2.032" x2="-7.366" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="3.048" x2="-8.128" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="3.048" x2="-8.128" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="2.032" x2="-7.366" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="-0.508" x2="-7.366" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="0.508" x2="-8.128" y2="0.4826" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="0.4826" x2="-8.128" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="-0.508" x2="-7.366" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="0.508" x2="-0.254" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="-0.508" x2="0.508" y2="-0.4826" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="-0.4826" x2="0.508" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="0.508" x2="-0.254" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="3.048" x2="-0.254" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="2.032" x2="0.508" y2="2.0574" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="2.0574" x2="0.4826" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="3.048" x2="-0.254" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="5.588" x2="-0.254" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="4.572" x2="0.4826" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="4.572" x2="0.4826" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="5.588" x2="-0.254" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="8.128" x2="-0.254" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="7.112" x2="0.4826" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="7.112" x2="0.4826" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="8.128" x2="-0.254" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="-1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="-1.27" x2="-0.254" y2="8.89" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="8.89" x2="-7.366" y2="8.89" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="8.89" x2="-7.366" y2="-1.27" width="0.1524" layer="25"/>
+<text x="-8.2042" y="8.4836" size="1.27" layer="25" ratio="6" rot="SR0">*</text>
+<text x="-6.6802" y="3.175" size="1.27" layer="25" ratio="6" rot="SR0">&gt;NAME</text>
+<text x="-7.2644" y="3.175" size="1.27" layer="27" ratio="6" rot="SR0">&gt;VALUE</text>
+</package>
+</packages>
+</library>
+<library name="raspberrypi_bastelstube_v13">
+<description>&lt;b&gt;Raspberry Pi&lt;/b&gt; by &lt;b&gt;Martin's Bastelstube&lt;/b&gt;
+&lt;p&gt;
+Different shapes of piggyback boards for the famous &amp;amp; fabulous
+&lt;a href="http://www.raspberrypi.org/"&gt;Raspberry Pi&lt;/a&gt; computer.
+&lt;p&gt;
+The outline of the Raspberry Pi board is drawn on layer 52 bDocu, so you can make it invisible if necessary.&lt;br/&gt;
+Recommendation: Start your design with RASPI_BOARD_*_FULL, so you are aware of all the big components and
+connectors when you're drawing the dimensions of your board and placing your own components.&lt;br/&gt;
+Later, you can simply change the package of your Raspberry Pi connector to the RASPI_BOARD_*_EDGES type,
+so you can concentrate on your own design.
+&lt;p&gt;
+Most of my board packages don't have the outline drawn in layer 20 Dimension (except the HATs). This allows you to deviate from the original Raspberry Pi board shape, e.g. when you need more space behind the GPIO connector for the routing of the power supply lines. If you want to stick exactly to the Raspberry Pi board shape, then just draw the Dimension layer right on the lines in layer bDocu.
+
+&lt;hr&gt;&lt;br/&gt;
+
+Version 1.3
+&lt;ul&gt;
+&lt;li&gt;Added the shape and dimensions of the HAT board with &amp;amp; without the camera and display flex cutout&lt;/li&gt;
+&lt;li&gt;New GPIO connector version (suffix &amp;quot;#&amp;quot;) with all pins connected (no more &amp;quot;n.c.&amp;quot; pins)&lt;/li&gt;
+&lt;li&gt;Two more &amp;quot;AB-&amp;quot; boards with 5 and 6 drill holes / pads, mechanically compatible with all RasPi versions&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.2
+&lt;ul&gt;
+&lt;li&gt;Added a 26-pin GPIO connector with board dimensions of model B+&lt;br/&gt;
+       for backwards compatibility with models A and B, named &amp;quot;B-&amp;quot;&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.1
+&lt;ul&gt;
+&lt;li&gt;New GPIO connector and board dimensions of model B+&lt;/li&gt;
+&lt;li&gt;Old connector and board (for models A and B) renamed to AB&lt;/li&gt;
+&lt;li&gt;GPIO pin numbers on connector changed to match Rev2 board design&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.0
+&lt;ul&gt;
+&lt;li&gt;More detailed descriptions for all components&lt;/li&gt;
+&lt;li&gt;Published on Cadsoft webpage&lt;/li&gt;
+&lt;/ul&gt;
+
+&lt;hr&gt;&lt;br/&gt;
+
+Designed by &lt;a href="http://bastelstube.rocci.net/"&gt;Martin's Bastelstube&lt;/a&gt;&lt;br&gt;
+Comments / complaints / bug reports / suggestions to &lt;author&gt;eightbit@web.de&lt;/author&gt;</description>
+<packages>
+<package name="RASPI_BOARD_AB_FULL">
+<description>Raspberry Pi board, full outline with position of big connectors + components&lt;br&gt;
+including drill holes for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="0" x2="0" y2="3.81" width="0.254" layer="52"/>
+<wire x1="0" y1="3.81" x2="0" y2="11.43" width="0.254" layer="52"/>
+<wire x1="0" y1="11.43" x2="0" y2="18.0975" width="0.254" layer="52"/>
+<wire x1="0" y1="18.0975" x2="0" y2="42.2275" width="0.254" layer="52"/>
+<wire x1="0" y1="42.2275" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="60.96" y2="55.88" width="0.254" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="68.2625" y2="55.88" width="0.254" layer="52"/>
+<wire x1="68.2625" y1="55.88" x2="70.8025" y2="55.88" width="0.254" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="37.1475" y2="0" width="0.254" layer="52"/>
+<wire x1="37.1475" y1="0" x2="51.7525" y2="0" width="0.254" layer="52"/>
+<wire x1="51.7525" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="37.465" width="0.254" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="85.09" y2="24.4475" width="0.254" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="85.09" y2="17.78" width="0.254" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="85.09" y2="1.905" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="86.6775" y2="1.905" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="1.905" x2="86.6775" y2="17.78" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="17.78" x2="85.09" y2="17.78" width="0.127" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="65.405" y2="17.78" width="0.127" layer="52"/>
+<wire x1="65.405" y1="17.78" x2="65.405" y2="1.905" width="0.127" layer="52"/>
+<wire x1="65.405" y1="1.905" x2="85.09" y2="1.905" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="91.7575" y2="37.465" width="0.127" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.465" x2="91.7575" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.7825" x2="92.075" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="92.075" y1="37.7825" x2="92.075" y2="24.13" width="0.127" layer="52"/>
+<wire x1="92.075" y1="24.13" x2="91.7575" y2="24.13" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="24.13" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="74.93" y2="37.465" width="0.127" layer="52"/>
+<wire x1="74.93" y1="37.465" x2="74.93" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="74.93" y1="24.4475" x2="85.09" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="0" y1="3.81" x2="5.08" y2="3.81" width="0.127" layer="52"/>
+<wire x1="5.08" y1="3.81" x2="5.08" y2="11.43" width="0.127" layer="52"/>
+<wire x1="5.08" y1="11.43" x2="0" y2="11.43" width="0.127" layer="52"/>
+<wire x1="0" y1="11.43" x2="-0.635" y2="11.7475" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="11.7475" x2="-0.635" y2="3.4925" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="3.4925" x2="0" y2="3.81" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="-0.9525" x2="51.7525" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="-0.9525" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="11.1125" x2="51.7525" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="11.1125" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="41.275" y1="53.34" x2="42.2275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="50.4825" y1="53.34" x2="51.435" y2="53.34" width="0.127" layer="52"/>
+<wire x1="58.42" y1="55.88" x2="60.96" y2="55.88" width="0.127" layer="52"/>
+<wire x1="51.435" y1="53.34" x2="51.435" y2="43.18" width="0.127" layer="52"/>
+<wire x1="51.435" y1="43.18" x2="41.275" y2="43.18" width="0.127" layer="52"/>
+<wire x1="41.275" y1="43.18" x2="41.275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="70.8025" y2="44.45" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="44.45" x2="58.42" y2="44.45" width="0.127" layer="52"/>
+<wire x1="58.42" y1="44.45" x2="58.42" y2="55.88" width="0.127" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="60.96" y2="58.9915" width="0.127" layer="52"/>
+<wire x1="60.96" y1="58.9915" x2="61.2775" y2="59.309" width="0.127" layer="52" curve="-90"/>
+<wire x1="61.2775" y1="59.309" x2="67.945" y2="59.309" width="0.127" layer="52"/>
+<wire x1="67.945" y1="59.309" x2="68.2625" y2="58.9915" width="0.127" layer="52" curve="-90"/>
+<wire x1="68.2625" y1="58.9915" x2="68.2625" y2="55.88" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="42.2275" y2="62.23" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="62.23" x2="42.8625" y2="62.865" width="0.127" layer="52" curve="-90"/>
+<wire x1="42.8625" y1="62.865" x2="49.8475" y2="62.865" width="0.127" layer="52"/>
+<wire x1="49.8475" y1="62.865" x2="50.4825" y2="62.23" width="0.127" layer="52" curve="-90"/>
+<wire x1="50.4825" y1="62.23" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="54.61" y2="46.99" width="0.127" layer="52"/>
+<wire x1="54.61" y1="46.99" x2="54.61" y2="44.45" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="26.67" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="52.07" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="27.6225" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="57.15" y2="44.45" width="0.127" layer="52"/>
+<wire x1="57.15" y1="44.45" x2="57.15" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.15" y1="27.6225" x2="57.15" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="26.67" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.4675" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="28.2575" x2="57.4675" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="27.6225" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="51.7525" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="28.2575" x2="51.7525" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="27.6225" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="0" y1="18.0975" x2="-17.145" y2="18.0975" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="18.0975" x2="-17.4625" y2="18.415" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="18.415" x2="-17.4625" y2="41.91" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="41.91" x2="-17.145" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="42.2275" x2="0" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="5.715" y1="49.53" x2="5.715" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.715" y1="47.9425" x2="5.715" y2="44.45" width="0.127" layer="52"/>
+<wire x1="5.715" y1="44.45" x2="15.875" y2="44.45" width="0.127" layer="52"/>
+<wire x1="15.875" y1="44.45" x2="15.875" y2="49.53" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.3975" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="48.5775" x2="5.3975" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="47.9425" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<circle x="13.0175" y="6.985" radius="3.175" width="0.127" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<hole x="80.1" y="43.6" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+<circle x="80.1" y="43.6" radius="3.25" width="0.127" layer="52"/>
+</package>
+</packages>
+</library>
+<library name="con-berg">
+<description>&lt;b&gt;Berg Connectors&lt;/b&gt;&lt;p&gt;
+Based on  the following source:
+&lt;ul&gt;
+&lt;li&gt;http://catalog.fciconnect.com
+&lt;/ul&gt;
+&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
+<packages>
+<package name="PN87520">
+<description>&lt;b&gt;USB connector&lt;/b&gt;</description>
+<wire x1="-7.4" y1="-10.19" x2="7.4" y2="-10.19" width="0.254" layer="21"/>
+<wire x1="7.4" y1="-10.19" x2="7.4" y2="4.11" width="0.254" layer="21"/>
+<wire x1="7.4" y1="4.11" x2="-7.4" y2="4.11" width="0.254" layer="21"/>
+<wire x1="-7.4" y1="4.11" x2="-7.4" y2="-10.19" width="0.254" layer="21"/>
+<wire x1="-5.08" y1="-2.87" x2="-3.81" y2="-8.72" width="0.1524" layer="21"/>
+<wire x1="-3.81" y1="-8.72" x2="-2.54" y2="-8.72" width="0.1524" layer="21"/>
+<wire x1="-2.54" y1="-8.72" x2="-1.27" y2="-2.87" width="0.1524" layer="21"/>
+<wire x1="1.27" y1="-2.87" x2="2.54" y2="-8.72" width="0.1524" layer="21"/>
+<wire x1="2.54" y1="-8.72" x2="3.81" y2="-8.72" width="0.1524" layer="21"/>
+<wire x1="3.81" y1="-8.72" x2="5.08" y2="-2.87" width="0.1524" layer="21"/>
+<wire x1="-2.46" y1="-0.1" x2="-2.46" y2="0.9" width="0.0508" layer="21" curve="180"/>
+<wire x1="-2.46" y1="-1.1" x2="-2.46" y2="-0.1" width="0.0508" layer="21" curve="180"/>
+<wire x1="3.665" y1="0.4" x2="3.665" y2="-0.6" width="0.0508" layer="21" curve="180"/>
+<wire x1="3.415" y1="0.9" x2="3.415" y2="-1.1" width="0.0508" layer="21" curve="180"/>
+<wire x1="3.665" y1="0.4" x2="4.165" y2="0.4" width="0.0508" layer="21" curve="-15.189287"/>
+<wire x1="3.415" y1="0.9" x2="4.175" y2="0.845" width="0.0508" layer="21" curve="-12.05913"/>
+<wire x1="3.415" y1="-1.1" x2="4.165" y2="-0.975" width="0.0508" layer="21" curve="18.422836"/>
+<wire x1="1.665" y1="-0.35" x2="1.665" y2="0.9" width="0.0508" layer="21" curve="180"/>
+<wire x1="1.29" y1="0.025" x2="1.29" y2="0.4" width="0.0508" layer="21" curve="180"/>
+<wire x1="-3.835" y1="0.9" x2="-3.835" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-3.835" y1="-1.1" x2="-3.21" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="-1.1" x2="-3.21" y2="-0.1" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="-0.1" x2="-3.21" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="0.9" x2="-3.835" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="0.9" x2="-2.46" y2="0.4" width="0.0508" layer="21"/>
+<wire x1="-2.46" y1="0.4" x2="-3.21" y2="-0.1" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="-0.1" x2="-2.46" y2="-0.6" width="0.0508" layer="21"/>
+<wire x1="-2.46" y1="-0.6" x2="-3.21" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-2.46" y1="-1.1" x2="-3.21" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-2.46" y1="0.9" x2="-3.21" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="-1.71" y1="0.9" x2="-1.71" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-1.71" y1="-1.1" x2="0.04" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="-1.1" x2="0.04" y2="-0.6" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="-0.6" x2="-1.085" y2="-0.6" width="0.0508" layer="21"/>
+<wire x1="-1.085" y1="-0.6" x2="-1.085" y2="-0.35" width="0.0508" layer="21"/>
+<wire x1="-1.085" y1="-0.35" x2="0.04" y2="-0.35" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="-0.35" x2="0.04" y2="0.15" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="0.15" x2="-1.085" y2="0.15" width="0.0508" layer="21"/>
+<wire x1="-1.085" y1="0.15" x2="-1.085" y2="0.4" width="0.0508" layer="21"/>
+<wire x1="-1.085" y1="0.4" x2="0.04" y2="0.4" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="0.4" x2="0.04" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="0.9" x2="-1.71" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="0.29" y1="0.9" x2="0.29" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="0.29" y1="-1.1" x2="0.915" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="-1.1" x2="0.915" y2="-0.35" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="-0.35" x2="1.415" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="1.415" y1="-1.1" x2="2.165" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="2.165" y1="-1.1" x2="1.665" y2="-0.35" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="0.4" x2="0.915" y2="0.025" width="0.0508" layer="21"/>
+<wire x1="0.29" y1="0.9" x2="1.665" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="0.4" x2="1.29" y2="0.4" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="0.025" x2="1.29" y2="0.025" width="0.0508" layer="21"/>
+<wire x1="3.665" y1="-0.1" x2="4.165" y2="-0.1" width="0.0508" layer="21"/>
+<wire x1="3.665" y1="-0.1" x2="3.665" y2="-0.6" width="0.0508" layer="21"/>
+<wire x1="4.16" y1="0.4" x2="4.16" y2="0.845" width="0.0508" layer="21"/>
+<wire x1="4.165" y1="-0.1" x2="4.165" y2="-0.975" width="0.0508" layer="21"/>
+<pad name="2" x="-1" y="2.71" drill="0.95" shape="long" rot="R90"/>
+<pad name="3" x="1" y="2.71" drill="0.95" shape="long" rot="R90"/>
+<pad name="1" x="-3.5" y="2.71" drill="0.95" shape="long" rot="R90"/>
+<pad name="4" x="3.5" y="2.71" drill="0.95" shape="long" rot="R90"/>
+<text x="-7.62" y="5.08" size="1.27" layer="25">&gt;NAME</text>
+<text x="9.144" y="-10.16" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
+<text x="-3.81" y="-2.04" size="0.4064" layer="21">E L E C T R O N I C S</text>
+<hole x="-6.57" y="0" drill="2.3"/>
+<hole x="6.57" y="0" drill="2.3"/>
+</package>
+</packages>
+</library>
+</libraries>
+<attributes>
+</attributes>
+<variantdefs>
+</variantdefs>
+<classes>
+<class number="0" name="default" width="0" drill="0">
+</class>
+</classes>
+<designrules name="default">
+<description language="de">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
+&lt;p&gt;
+Die Standard-Design-Rules sind so gewählt, dass sie für 
+die meisten Anwendungen passen. Sollte ihre Platine 
+besondere Anforderungen haben, treffen Sie die erforderlichen
+Einstellungen hier und speichern die Design Rules unter 
+einem neuen Namen ab.</description>
+<description language="en">&lt;b&gt;EAGLE Design Rules&lt;/b&gt;
+&lt;p&gt;
+The default Design Rules have been set to cover
+a wide range of applications. Your particular design
+may have different requirements, so please make the
+necessary adjustments and save your customized
+design rules under a new name.</description>
+<param name="layerSetup" value="(1*16)"/>
+<param name="mtCopper" value="0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm 0.035mm"/>
+<param name="mtIsolate" value="1.5mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm 0.15mm 0.2mm"/>
+<param name="mdWireWire" value="8mil"/>
+<param name="mdWirePad" value="8mil"/>
+<param name="mdWireVia" value="8mil"/>
+<param name="mdPadPad" value="8mil"/>
+<param name="mdPadVia" value="8mil"/>
+<param name="mdViaVia" value="8mil"/>
+<param name="mdSmdPad" value="8mil"/>
+<param name="mdSmdVia" value="8mil"/>
+<param name="mdSmdSmd" value="8mil"/>
+<param name="mdViaViaSameLayer" value="8mil"/>
+<param name="mnLayersViaInSmd" value="2"/>
+<param name="mdCopperDimension" value="40mil"/>
+<param name="mdDrill" value="8mil"/>
+<param name="mdSmdStop" value="0mil"/>
+<param name="msWidth" value="10mil"/>
+<param name="msDrill" value="24mil"/>
+<param name="msMicroVia" value="9.99mm"/>
+<param name="msBlindViaRatio" value="0.5"/>
+<param name="rvPadTop" value="0.25"/>
+<param name="rvPadInner" value="0.25"/>
+<param name="rvPadBottom" value="0.25"/>
+<param name="rvViaOuter" value="0.25"/>
+<param name="rvViaInner" value="0.25"/>
+<param name="rvMicroViaOuter" value="0.25"/>
+<param name="rvMicroViaInner" value="0.25"/>
+<param name="rlMinPadTop" value="10mil"/>
+<param name="rlMaxPadTop" value="20mil"/>
+<param name="rlMinPadInner" value="10mil"/>
+<param name="rlMaxPadInner" value="20mil"/>
+<param name="rlMinPadBottom" value="10mil"/>
+<param name="rlMaxPadBottom" value="20mil"/>
+<param name="rlMinViaOuter" value="8mil"/>
+<param name="rlMaxViaOuter" value="20mil"/>
+<param name="rlMinViaInner" value="8mil"/>
+<param name="rlMaxViaInner" value="20mil"/>
+<param name="rlMinMicroViaOuter" value="4mil"/>
+<param name="rlMaxMicroViaOuter" value="20mil"/>
+<param name="rlMinMicroViaInner" value="4mil"/>
+<param name="rlMaxMicroViaInner" value="20mil"/>
+<param name="psTop" value="-1"/>
+<param name="psBottom" value="-1"/>
+<param name="psFirst" value="-1"/>
+<param name="psElongationLong" value="100"/>
+<param name="psElongationOffset" value="100"/>
+<param name="mvStopFrame" value="1"/>
+<param name="mvCreamFrame" value="0"/>
+<param name="mlMinStopFrame" value="4mil"/>
+<param name="mlMaxStopFrame" value="4mil"/>
+<param name="mlMinCreamFrame" value="0mil"/>
+<param name="mlMaxCreamFrame" value="0mil"/>
+<param name="mlViaStopLimit" value="0mil"/>
+<param name="srRoundness" value="0"/>
+<param name="srMinRoundness" value="0mil"/>
+<param name="srMaxRoundness" value="0mil"/>
+<param name="slThermalIsolate" value="10mil"/>
+<param name="slThermalsForVias" value="0"/>
+<param name="dpMaxLengthDifference" value="10mm"/>
+<param name="dpGapFactor" value="2.5"/>
+<param name="checkGrid" value="0"/>
+<param name="checkAngle" value="0"/>
+<param name="checkFont" value="1"/>
+<param name="checkRestrict" value="1"/>
+<param name="useDiameter" value="13"/>
+<param name="maxErrors" value="50"/>
+</designrules>
+<autorouter>
+<pass name="Default">
+<param name="RoutingGrid" value="50mil"/>
+<param name="AutoGrid" value="1"/>
+<param name="Efforts" value="0"/>
+<param name="TopRouterVariant" value="1"/>
+<param name="tpViaShape" value="round"/>
+<param name="PrefDir.1" value="a"/>
+<param name="PrefDir.2" value="0"/>
+<param name="PrefDir.3" value="0"/>
+<param name="PrefDir.4" value="0"/>
+<param name="PrefDir.5" value="0"/>
+<param name="PrefDir.6" value="0"/>
+<param name="PrefDir.7" value="0"/>
+<param name="PrefDir.8" value="0"/>
+<param name="PrefDir.9" value="0"/>
+<param name="PrefDir.10" value="0"/>
+<param name="PrefDir.11" value="0"/>
+<param name="PrefDir.12" value="0"/>
+<param name="PrefDir.13" value="0"/>
+<param name="PrefDir.14" value="0"/>
+<param name="PrefDir.15" value="0"/>
+<param name="PrefDir.16" value="a"/>
+<param name="cfVia" value="8"/>
+<param name="cfNonPref" value="5"/>
+<param name="cfChangeDir" value="2"/>
+<param name="cfOrthStep" value="2"/>
+<param name="cfDiagStep" value="3"/>
+<param name="cfExtdStep" value="0"/>
+<param name="cfBonusStep" value="1"/>
+<param name="cfMalusStep" value="1"/>
+<param name="cfPadImpact" value="4"/>
+<param name="cfSmdImpact" value="4"/>
+<param name="cfBusImpact" value="0"/>
+<param name="cfHugging" value="3"/>
+<param name="cfAvoid" value="4"/>
+<param name="cfPolygon" value="10"/>
+<param name="cfBase.1" value="0"/>
+<param name="cfBase.2" value="1"/>
+<param name="cfBase.3" value="1"/>
+<param name="cfBase.4" value="1"/>
+<param name="cfBase.5" value="1"/>
+<param name="cfBase.6" value="1"/>
+<param name="cfBase.7" value="1"/>
+<param name="cfBase.8" value="1"/>
+<param name="cfBase.9" value="1"/>
+<param name="cfBase.10" value="1"/>
+<param name="cfBase.11" value="1"/>
+<param name="cfBase.12" value="1"/>
+<param name="cfBase.13" value="1"/>
+<param name="cfBase.14" value="1"/>
+<param name="cfBase.15" value="1"/>
+<param name="cfBase.16" value="0"/>
+<param name="mnVias" value="20"/>
+<param name="mnSegments" value="9999"/>
+<param name="mnExtdSteps" value="9999"/>
+<param name="mnRipupLevel" value="10"/>
+<param name="mnRipupSteps" value="100"/>
+<param name="mnRipupTotal" value="100"/>
+</pass>
+<pass name="Follow-me" refer="Default" active="yes">
+</pass>
+<pass name="Busses" refer="Default" active="yes">
+<param name="cfNonPref" value="4"/>
+<param name="cfBusImpact" value="4"/>
+<param name="cfHugging" value="0"/>
+<param name="mnVias" value="0"/>
+</pass>
+<pass name="Route" refer="Default" active="yes">
+</pass>
+<pass name="Optimize1" refer="Default" active="yes">
+<param name="cfVia" value="99"/>
+<param name="cfExtdStep" value="10"/>
+<param name="cfHugging" value="1"/>
+<param name="mnExtdSteps" value="1"/>
+<param name="mnRipupLevel" value="0"/>
+</pass>
+<pass name="Optimize2" refer="Optimize1" active="yes">
+<param name="cfNonPref" value="0"/>
+<param name="cfChangeDir" value="6"/>
+<param name="cfExtdStep" value="0"/>
+<param name="cfBonusStep" value="2"/>
+<param name="cfMalusStep" value="2"/>
+<param name="cfPadImpact" value="2"/>
+<param name="cfSmdImpact" value="2"/>
+<param name="cfHugging" value="0"/>
+</pass>
+<pass name="Optimize3" refer="Optimize2" active="yes">
+<param name="cfChangeDir" value="8"/>
+<param name="cfPadImpact" value="0"/>
+<param name="cfSmdImpact" value="0"/>
+</pass>
+<pass name="Optimize4" refer="Optimize3" active="yes">
+<param name="cfChangeDir" value="25"/>
+</pass>
+</autorouter>
+<elements>
+<element name="U$1" library="mcp4161" package="PDIP8_300MC" value="MCP4161-XXXX/P" x="30.48" y="55.88"/>
+<element name="X1" library="raspberrypi_bastelstube_v13" package="RASPI_BOARD_AB_FULL" value="RASPI_BOARD_AB_F" x="-105.41" y="1.27"/>
+<element name="X2" library="con-berg" package="PN87520" value="" x="-1.27" y="71.12" rot="R270">
+<attribute name="MF" value="" x="-1.27" y="71.12" size="1.778" layer="27" rot="R270" display="off"/>
+<attribute name="OC_FARNELL" value="unknown" x="-1.27" y="71.12" size="1.778" layer="27" rot="R270" display="off"/>
+<attribute name="OC_NEWARK" value="unknown" x="-1.27" y="71.12" size="1.778" layer="27" rot="R270" display="off"/>
+<attribute name="MPN" value="" x="-1.27" y="71.12" size="1.778" layer="27" rot="R270" display="off"/>
+</element>
+</elements>
+<signals>
+<signal name="3V3">
+<contactref element="X1" pad="1"/>
+</signal>
+<signal name="N$2">
+<contactref element="U$1" pad="4"/>
+<contactref element="X1" pad="6"/>
+<wire x1="22.86" y1="55.88" x2="-98.425" y2="54.61" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$3">
+<contactref element="U$1" pad="8"/>
+<contactref element="X1" pad="2"/>
+<wire x1="30.48" y1="63.5" x2="-103.505" y2="54.61" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$1">
+<contactref element="X1" pad="19"/>
+<contactref element="U$1" pad="3"/>
+<wire x1="-80.645" y1="52.07" x2="22.86" y2="58.42" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$4">
+<contactref element="X1" pad="23"/>
+<contactref element="U$1" pad="2"/>
+<wire x1="-75.565" y1="52.07" x2="22.86" y2="60.96" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$5">
+<contactref element="U$1" pad="7"/>
+<contactref element="X2" pad="1"/>
+<wire x1="30.48" y1="60.96" x2="1.44" y2="74.62" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$6">
+<contactref element="U$1" pad="5"/>
+<contactref element="X2" pad="4"/>
+<wire x1="30.48" y1="55.88" x2="1.44" y2="67.62" width="0" layer="19" extent="1-1"/>
+</signal>
+<signal name="N$7">
+<contactref element="X1" pad="24"/>
+<contactref element="U$1" pad="1"/>
+<wire x1="-75.565" y1="54.61" x2="22.86" y2="63.5" width="0" layer="19" extent="1-1"/>
+</signal>
+</signals>
+</board>
+</drawing>
+</eagle>

schematics/Timelaps/schemas.s#1

@@ -0,0 +1,1461 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE eagle SYSTEM "eagle.dtd">
+<eagle version="7.3.0">
+<drawing>
+<settings>
+<setting alwaysvectorfont="no"/>
+<setting verticaltext="up"/>
+</settings>
+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
+<layers>
+<layer number="1" name="Top" color="4" fill="1" visible="no" active="no"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="no"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="no" active="no"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="no" active="no"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="no"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="no" active="no"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="no"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="no"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="no"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="no"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="no" active="no"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="no" active="no"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="no" active="no"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="no" active="no"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="no"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="no"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="no"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="no"/>
+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="no"/>
+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="no"/>
+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="no"/>
+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="no"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="no"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="no"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="no"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="no"/>
+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="no"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="no"/>
+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="no"/>
+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="no"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="no"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="no"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="no"/>
+<layer number="48" name="Document" color="7" fill="1" visible="no" active="no"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="no" active="no"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="no"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="no" active="no"/>
+<layer number="90" name="Modules" color="5" fill="1" visible="yes" active="yes"/>
+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
+</layers>
+<schematic xreflabel="%F%N/%S.%C%R" xrefpart="/%S.%C%R">
+<libraries>
+<library name="mcp4161">
+<packages>
+<package name="PDIP8_300MC">
+<pad name="1" x="-7.62" y="7.62" drill="0.9906" shape="square"/>
+<pad name="2" x="-7.62" y="5.08" drill="0.9906"/>
+<pad name="3" x="-7.62" y="2.54" drill="0.9906"/>
+<pad name="4" x="-7.62" y="0" drill="0.9906"/>
+<pad name="5" x="0" y="0" drill="0.9906"/>
+<pad name="6" x="0" y="2.54" drill="0.9906"/>
+<pad name="7" x="0" y="5.08" drill="0.9906"/>
+<pad name="8" x="0" y="7.62" drill="0.9906"/>
+<wire x1="-0.254" y1="8.6614" x2="-0.254" y2="8.89" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="6.1214" x2="-0.254" y2="6.5786" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="3.5814" x2="-0.254" y2="4.0386" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="1.0414" x2="-0.254" y2="1.4986" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="-1.0414" x2="-7.366" y2="-1.27" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="-1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="-1.27" x2="-0.254" y2="-1.0414" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="8.89" x2="-7.366" y2="8.89" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="8.89" x2="-7.366" y2="8.7122" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="6.5278" x2="-7.366" y2="6.1214" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="4.0386" x2="-7.366" y2="3.5814" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="1.4986" x2="-7.366" y2="1.0414" width="0.1524" layer="51"/>
+<text x="-8.2042" y="8.4836" size="1.27" layer="51" ratio="6" rot="SR0">*</text>
+<wire x1="-7.366" y1="7.112" x2="-7.366" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="8.128" x2="-8.128" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="8.128" x2="-8.128" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="7.112" x2="-7.366" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="4.572" x2="-7.366" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="5.588" x2="-8.128" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="5.588" x2="-8.128" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="4.572" x2="-7.366" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="2.032" x2="-7.366" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="3.048" x2="-8.128" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="3.048" x2="-8.128" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="2.032" x2="-7.366" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="-0.508" x2="-7.366" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="0.508" x2="-8.128" y2="0.4826" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="0.4826" x2="-8.128" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="-0.508" x2="-7.366" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="0.508" x2="-0.254" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="-0.508" x2="0.508" y2="-0.4826" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="-0.4826" x2="0.508" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="0.508" x2="-0.254" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="3.048" x2="-0.254" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="2.032" x2="0.508" y2="2.0574" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="2.0574" x2="0.4826" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="3.048" x2="-0.254" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="5.588" x2="-0.254" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="4.572" x2="0.4826" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="4.572" x2="0.4826" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="5.588" x2="-0.254" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="8.128" x2="-0.254" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="7.112" x2="0.4826" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="7.112" x2="0.4826" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="8.128" x2="-0.254" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="-1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="-1.27" x2="-0.254" y2="8.89" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="8.89" x2="-7.366" y2="8.89" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="8.89" x2="-7.366" y2="-1.27" width="0.1524" layer="25"/>
+<text x="-8.2042" y="8.4836" size="1.27" layer="25" ratio="6" rot="SR0">*</text>
+<text x="-6.6802" y="3.175" size="1.27" layer="25" ratio="6" rot="SR0">&gt;NAME</text>
+<text x="-7.2644" y="3.175" size="1.27" layer="27" ratio="6" rot="SR0">&gt;VALUE</text>
+</package>
+</packages>
+<symbols>
+<symbol name="MCP4161-XXXX/P">
+<pin name="*CS" x="0" y="0" direction="pas"/>
+<pin name="SCK" x="0" y="-2.54" direction="pas"/>
+<pin name="SDI/SDO" x="0" y="-5.08" direction="pas"/>
+<pin name="VSS" x="0" y="-7.62" direction="pas"/>
+<pin name="P0A" x="48.26" y="-7.62" direction="pas" rot="R180"/>
+<pin name="P0W" x="48.26" y="-5.08" direction="pas" rot="R180"/>
+<pin name="P0B" x="48.26" y="-2.54" direction="pas" rot="R180"/>
+<pin name="VDD" x="48.26" y="0" direction="pas" rot="R180"/>
+<wire x1="7.62" y1="5.08" x2="7.62" y2="-12.7" width="0.1524" layer="94"/>
+<wire x1="7.62" y1="-12.7" x2="40.64" y2="-12.7" width="0.1524" layer="94"/>
+<wire x1="40.64" y1="-12.7" x2="40.64" y2="5.08" width="0.1524" layer="94"/>
+<wire x1="40.64" y1="5.08" x2="7.62" y2="5.08" width="0.1524" layer="94"/>
+<text x="19.4056" y="9.1186" size="2.0828" layer="95" ratio="6" rot="SR0">&gt;NAME</text>
+<text x="18.4658" y="6.5786" size="2.0828" layer="96" ratio="6" rot="SR0">&gt;VALUE</text>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="MCP4161-XXXX/P">
+<gates>
+<gate name="A" symbol="MCP4161-XXXX/P" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="PDIP8_300MC">
+<connects>
+<connect gate="A" pin="*CS" pad="1"/>
+<connect gate="A" pin="P0A" pad="5"/>
+<connect gate="A" pin="P0B" pad="7"/>
+<connect gate="A" pin="P0W" pad="6"/>
+<connect gate="A" pin="SCK" pad="2"/>
+<connect gate="A" pin="SDI/SDO" pad="3"/>
+<connect gate="A" pin="VDD" pad="8"/>
+<connect gate="A" pin="VSS" pad="4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="raspberrypi_bastelstube_v13">
+<description>&lt;b&gt;Raspberry Pi&lt;/b&gt; by &lt;b&gt;Martin's Bastelstube&lt;/b&gt;
+&lt;p&gt;
+Different shapes of piggyback boards for the famous &amp;amp; fabulous
+&lt;a href="http://www.raspberrypi.org/"&gt;Raspberry Pi&lt;/a&gt; computer.
+&lt;p&gt;
+The outline of the Raspberry Pi board is drawn on layer 52 bDocu, so you can make it invisible if necessary.&lt;br/&gt;
+Recommendation: Start your design with RASPI_BOARD_*_FULL, so you are aware of all the big components and
+connectors when you're drawing the dimensions of your board and placing your own components.&lt;br/&gt;
+Later, you can simply change the package of your Raspberry Pi connector to the RASPI_BOARD_*_EDGES type,
+so you can concentrate on your own design.
+&lt;p&gt;
+Most of my board packages don't have the outline drawn in layer 20 Dimension (except the HATs). This allows you to deviate from the original Raspberry Pi board shape, e.g. when you need more space behind the GPIO connector for the routing of the power supply lines. If you want to stick exactly to the Raspberry Pi board shape, then just draw the Dimension layer right on the lines in layer bDocu.
+
+&lt;hr&gt;&lt;br/&gt;
+
+Version 1.3
+&lt;ul&gt;
+&lt;li&gt;Added the shape and dimensions of the HAT board with &amp;amp; without the camera and display flex cutout&lt;/li&gt;
+&lt;li&gt;New GPIO connector version (suffix &amp;quot;#&amp;quot;) with all pins connected (no more &amp;quot;n.c.&amp;quot; pins)&lt;/li&gt;
+&lt;li&gt;Two more &amp;quot;AB-&amp;quot; boards with 5 and 6 drill holes / pads, mechanically compatible with all RasPi versions&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.2
+&lt;ul&gt;
+&lt;li&gt;Added a 26-pin GPIO connector with board dimensions of model B+&lt;br/&gt;
+       for backwards compatibility with models A and B, named &amp;quot;B-&amp;quot;&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.1
+&lt;ul&gt;
+&lt;li&gt;New GPIO connector and board dimensions of model B+&lt;/li&gt;
+&lt;li&gt;Old connector and board (for models A and B) renamed to AB&lt;/li&gt;
+&lt;li&gt;GPIO pin numbers on connector changed to match Rev2 board design&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.0
+&lt;ul&gt;
+&lt;li&gt;More detailed descriptions for all components&lt;/li&gt;
+&lt;li&gt;Published on Cadsoft webpage&lt;/li&gt;
+&lt;/ul&gt;
+
+&lt;hr&gt;&lt;br/&gt;
+
+Designed by &lt;a href="http://bastelstube.rocci.net/"&gt;Martin's Bastelstube&lt;/a&gt;&lt;br&gt;
+Comments / complaints / bug reports / suggestions to &lt;author&gt;eightbit@web.de&lt;/author&gt;</description>
+<packages>
+<package name="RASPI_BOARD_AB_EDGES_2DRILL">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+including 2 drill holes for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<hole x="80.1" y="43.6" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+<circle x="80.1" y="43.6" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_FULL">
+<description>Raspberry Pi board, full outline with position of big connectors + components&lt;br&gt;
+including drill holes for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="0" x2="0" y2="3.81" width="0.254" layer="52"/>
+<wire x1="0" y1="3.81" x2="0" y2="11.43" width="0.254" layer="52"/>
+<wire x1="0" y1="11.43" x2="0" y2="18.0975" width="0.254" layer="52"/>
+<wire x1="0" y1="18.0975" x2="0" y2="42.2275" width="0.254" layer="52"/>
+<wire x1="0" y1="42.2275" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="60.96" y2="55.88" width="0.254" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="68.2625" y2="55.88" width="0.254" layer="52"/>
+<wire x1="68.2625" y1="55.88" x2="70.8025" y2="55.88" width="0.254" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="37.1475" y2="0" width="0.254" layer="52"/>
+<wire x1="37.1475" y1="0" x2="51.7525" y2="0" width="0.254" layer="52"/>
+<wire x1="51.7525" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="37.465" width="0.254" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="85.09" y2="24.4475" width="0.254" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="85.09" y2="17.78" width="0.254" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="85.09" y2="1.905" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="86.6775" y2="1.905" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="1.905" x2="86.6775" y2="17.78" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="17.78" x2="85.09" y2="17.78" width="0.127" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="65.405" y2="17.78" width="0.127" layer="52"/>
+<wire x1="65.405" y1="17.78" x2="65.405" y2="1.905" width="0.127" layer="52"/>
+<wire x1="65.405" y1="1.905" x2="85.09" y2="1.905" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="91.7575" y2="37.465" width="0.127" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.465" x2="91.7575" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.7825" x2="92.075" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="92.075" y1="37.7825" x2="92.075" y2="24.13" width="0.127" layer="52"/>
+<wire x1="92.075" y1="24.13" x2="91.7575" y2="24.13" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="24.13" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="74.93" y2="37.465" width="0.127" layer="52"/>
+<wire x1="74.93" y1="37.465" x2="74.93" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="74.93" y1="24.4475" x2="85.09" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="0" y1="3.81" x2="5.08" y2="3.81" width="0.127" layer="52"/>
+<wire x1="5.08" y1="3.81" x2="5.08" y2="11.43" width="0.127" layer="52"/>
+<wire x1="5.08" y1="11.43" x2="0" y2="11.43" width="0.127" layer="52"/>
+<wire x1="0" y1="11.43" x2="-0.635" y2="11.7475" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="11.7475" x2="-0.635" y2="3.4925" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="3.4925" x2="0" y2="3.81" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="-0.9525" x2="51.7525" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="-0.9525" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="11.1125" x2="51.7525" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="11.1125" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="41.275" y1="53.34" x2="42.2275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="50.4825" y1="53.34" x2="51.435" y2="53.34" width="0.127" layer="52"/>
+<wire x1="58.42" y1="55.88" x2="60.96" y2="55.88" width="0.127" layer="52"/>
+<wire x1="51.435" y1="53.34" x2="51.435" y2="43.18" width="0.127" layer="52"/>
+<wire x1="51.435" y1="43.18" x2="41.275" y2="43.18" width="0.127" layer="52"/>
+<wire x1="41.275" y1="43.18" x2="41.275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="70.8025" y2="44.45" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="44.45" x2="58.42" y2="44.45" width="0.127" layer="52"/>
+<wire x1="58.42" y1="44.45" x2="58.42" y2="55.88" width="0.127" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="60.96" y2="58.9915" width="0.127" layer="52"/>
+<wire x1="60.96" y1="58.9915" x2="61.2775" y2="59.309" width="0.127" layer="52" curve="-90"/>
+<wire x1="61.2775" y1="59.309" x2="67.945" y2="59.309" width="0.127" layer="52"/>
+<wire x1="67.945" y1="59.309" x2="68.2625" y2="58.9915" width="0.127" layer="52" curve="-90"/>
+<wire x1="68.2625" y1="58.9915" x2="68.2625" y2="55.88" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="42.2275" y2="62.23" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="62.23" x2="42.8625" y2="62.865" width="0.127" layer="52" curve="-90"/>
+<wire x1="42.8625" y1="62.865" x2="49.8475" y2="62.865" width="0.127" layer="52"/>
+<wire x1="49.8475" y1="62.865" x2="50.4825" y2="62.23" width="0.127" layer="52" curve="-90"/>
+<wire x1="50.4825" y1="62.23" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="54.61" y2="46.99" width="0.127" layer="52"/>
+<wire x1="54.61" y1="46.99" x2="54.61" y2="44.45" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="26.67" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="52.07" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="27.6225" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="57.15" y2="44.45" width="0.127" layer="52"/>
+<wire x1="57.15" y1="44.45" x2="57.15" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.15" y1="27.6225" x2="57.15" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="26.67" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.4675" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="28.2575" x2="57.4675" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="27.6225" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="51.7525" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="28.2575" x2="51.7525" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="27.6225" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="0" y1="18.0975" x2="-17.145" y2="18.0975" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="18.0975" x2="-17.4625" y2="18.415" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="18.415" x2="-17.4625" y2="41.91" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="41.91" x2="-17.145" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="42.2275" x2="0" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="5.715" y1="49.53" x2="5.715" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.715" y1="47.9425" x2="5.715" y2="44.45" width="0.127" layer="52"/>
+<wire x1="5.715" y1="44.45" x2="15.875" y2="44.45" width="0.127" layer="52"/>
+<wire x1="15.875" y1="44.45" x2="15.875" y2="49.53" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.3975" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="48.5775" x2="5.3975" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="47.9425" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<circle x="13.0175" y="6.985" radius="3.175" width="0.127" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<hole x="80.1" y="43.6" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+<circle x="80.1" y="43.6" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_EDGES_1DRILL">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+including 1 drill hole for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="80.1" y="43.6" drill="3"/>
+<circle x="80.1" y="43.6" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_THIN_DRILL">
+<description>Raspberry Pi board
+ - 
+Thin version with only the width of the GPIO connector and 1 drill hole</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="51"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="51"/>
+<wire x1="31.75" y1="55.88" x2="34.29" y2="55.88" width="0.254" layer="51"/>
+<wire x1="34.29" y1="55.88" x2="34.29" y2="53.34" width="0.254" layer="51"/>
+<wire x1="31.75" y1="0" x2="34.29" y2="0" width="0.254" layer="51"/>
+<wire x1="34.29" y1="0" x2="34.29" y2="2.54" width="0.254" layer="51"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_EDGES_1DRILL_PAD">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+including 1 mounting pad for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<pad name="DRILL_2" x="80.1" y="43.6" drill="3" diameter="6.5"/>
+</package>
+<package name="RASPI_BOARD_AB_EDGES_2DRILL_PAD">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+including 2 mounting pads for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<pad name="DRILL_1" x="25.5" y="18" drill="3" diameter="6.5"/>
+<pad name="DRILL_2" x="80.1" y="43.6" drill="3" diameter="6.5"/>
+</package>
+<package name="RASPI_BOARD_AB_FULL_PAD">
+<description>Raspberry Pi board, full outline with position of big connectors + components&lt;br&gt;
+including mounting pads for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="0" x2="0" y2="3.81" width="0.254" layer="52"/>
+<wire x1="0" y1="3.81" x2="0" y2="11.43" width="0.254" layer="52"/>
+<wire x1="0" y1="11.43" x2="0" y2="18.0975" width="0.254" layer="52"/>
+<wire x1="0" y1="18.0975" x2="0" y2="42.2275" width="0.254" layer="52"/>
+<wire x1="0" y1="42.2275" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="58.42" y2="55.88" width="0.254" layer="52"/>
+<wire x1="58.42" y1="55.88" x2="60.96" y2="55.88" width="0.254" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="68.2625" y2="55.88" width="0.254" layer="52"/>
+<wire x1="68.2625" y1="55.88" x2="70.8025" y2="55.88" width="0.254" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="37.1475" y2="0" width="0.254" layer="52"/>
+<wire x1="37.1475" y1="0" x2="51.7525" y2="0" width="0.254" layer="52"/>
+<wire x1="51.7525" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="37.465" width="0.254" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="85.09" y2="24.4475" width="0.254" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="85.09" y2="17.78" width="0.254" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="85.09" y2="1.905" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="86.6775" y2="1.905" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="1.905" x2="86.6775" y2="17.78" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="17.78" x2="85.09" y2="17.78" width="0.127" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="65.405" y2="17.78" width="0.127" layer="52"/>
+<wire x1="65.405" y1="17.78" x2="65.405" y2="1.905" width="0.127" layer="52"/>
+<wire x1="65.405" y1="1.905" x2="85.09" y2="1.905" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="91.7575" y2="37.465" width="0.127" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.465" x2="91.7575" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.7825" x2="92.075" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="92.075" y1="37.7825" x2="92.075" y2="24.13" width="0.127" layer="52"/>
+<wire x1="92.075" y1="24.13" x2="91.7575" y2="24.13" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="24.13" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="74.93" y2="37.465" width="0.127" layer="52"/>
+<wire x1="74.93" y1="37.465" x2="74.93" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="74.93" y1="24.4475" x2="85.09" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="0" y1="3.81" x2="5.08" y2="3.81" width="0.127" layer="52"/>
+<wire x1="5.08" y1="3.81" x2="5.08" y2="11.43" width="0.127" layer="52"/>
+<wire x1="5.08" y1="11.43" x2="0" y2="11.43" width="0.127" layer="52"/>
+<wire x1="0" y1="11.43" x2="-0.635" y2="11.7475" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="11.7475" x2="-0.635" y2="3.4925" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="3.4925" x2="0" y2="3.81" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="-0.9525" x2="51.7525" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="-0.9525" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="11.1125" x2="51.7525" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="11.1125" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="41.275" y1="53.34" x2="42.2275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="50.4825" y1="53.34" x2="51.435" y2="53.34" width="0.127" layer="52"/>
+<wire x1="51.435" y1="53.34" x2="51.435" y2="43.18" width="0.127" layer="52"/>
+<wire x1="51.435" y1="43.18" x2="41.275" y2="43.18" width="0.127" layer="52"/>
+<wire x1="41.275" y1="43.18" x2="41.275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="70.8025" y2="44.45" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="44.45" x2="58.42" y2="44.45" width="0.127" layer="52"/>
+<wire x1="58.42" y1="44.45" x2="58.42" y2="55.88" width="0.127" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="60.96" y2="58.9915" width="0.127" layer="52"/>
+<wire x1="60.96" y1="58.9915" x2="61.2775" y2="59.309" width="0.127" layer="52" curve="-90"/>
+<wire x1="61.2775" y1="59.309" x2="67.945" y2="59.309" width="0.127" layer="52"/>
+<wire x1="67.945" y1="59.309" x2="68.2625" y2="58.9915" width="0.127" layer="52" curve="-90"/>
+<wire x1="68.2625" y1="58.9915" x2="68.2625" y2="55.88" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="42.2275" y2="62.23" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="62.23" x2="42.8625" y2="62.865" width="0.127" layer="52" curve="-90"/>
+<wire x1="42.8625" y1="62.865" x2="49.8475" y2="62.865" width="0.127" layer="52"/>
+<wire x1="49.8475" y1="62.865" x2="50.4825" y2="62.23" width="0.127" layer="52" curve="-90"/>
+<wire x1="50.4825" y1="62.23" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="54.61" y2="46.99" width="0.127" layer="52"/>
+<wire x1="54.61" y1="46.99" x2="54.61" y2="44.45" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="26.67" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="52.07" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="27.6225" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="57.15" y2="44.45" width="0.127" layer="52"/>
+<wire x1="57.15" y1="44.45" x2="57.15" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.15" y1="27.6225" x2="57.15" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="26.67" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.4675" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="28.2575" x2="57.4675" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="27.6225" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="51.7525" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="28.2575" x2="51.7525" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="27.6225" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="0" y1="18.0975" x2="-17.145" y2="18.0975" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="18.0975" x2="-17.4625" y2="18.415" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="18.415" x2="-17.4625" y2="41.91" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="41.91" x2="-17.145" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="42.2275" x2="0" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="5.715" y1="49.53" x2="5.715" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.715" y1="47.9425" x2="5.715" y2="44.45" width="0.127" layer="52"/>
+<wire x1="5.715" y1="44.45" x2="15.875" y2="44.45" width="0.127" layer="52"/>
+<wire x1="15.875" y1="44.45" x2="15.875" y2="49.53" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.3975" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="48.5775" x2="5.3975" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="47.9425" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<circle x="13.0175" y="6.985" radius="3.175" width="0.127" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<pad name="DRILL_1" x="25.5" y="18" drill="3" diameter="6.5"/>
+<pad name="DRILL_2" x="80.1" y="43.6" drill="3" diameter="6.5"/>
+</package>
+<package name="RASPI_BOARD_AB_THIN_PAD">
+<description>Raspberry Pi board
+ - 
+Thin version with only the width of the GPIO connector and 1 mounting pad</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="51"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="51"/>
+<wire x1="31.75" y1="55.88" x2="34.29" y2="55.88" width="0.254" layer="51"/>
+<wire x1="34.29" y1="55.88" x2="34.29" y2="53.34" width="0.254" layer="51"/>
+<wire x1="31.75" y1="0" x2="34.29" y2="0" width="0.254" layer="51"/>
+<wire x1="34.29" y1="0" x2="34.29" y2="2.54" width="0.254" layer="51"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<pad name="DRILL_1" x="25.5" y="18" drill="3" diameter="6.5"/>
+</package>
+<package name="RASPI_BOARD_AB_THIN_BOT">
+<description>Raspberry Pi board - Thin version with only the width of the GPIO connector and 1 drill hole&lt;p/&gt;
+Pads are in "Offset" shape to make them easy to solder from the bottom side&lt;br/&gt;
+for single-side PCBs</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="51"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="51"/>
+<wire x1="31.75" y1="55.88" x2="34.29" y2="55.88" width="0.254" layer="51"/>
+<wire x1="34.29" y1="55.88" x2="34.29" y2="53.34" width="0.254" layer="51"/>
+<wire x1="31.75" y1="0" x2="34.29" y2="0" width="0.254" layer="51"/>
+<wire x1="34.29" y1="0" x2="34.29" y2="2.54" width="0.254" layer="51"/>
+<pad name="1" x="1.905" y="50.8" drill="0.8" diameter="1.778" shape="offset" rot="R270"/>
+<pad name="2" x="1.905" y="53.34" drill="0.8" diameter="1.778" shape="offset" rot="R90"/>
+<pad name="3" x="4.445" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="4" x="4.445" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="5" x="6.985" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="6" x="6.985" y="53.34" drill="0.8" diameter="1.778" shape="offset" rot="R90"/>
+<pad name="7" x="9.525" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="8" x="9.525" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="9" x="12.065" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="10" x="12.065" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="11" x="14.605" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="12" x="14.605" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="13" x="17.145" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="14" x="17.145" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="15" x="19.685" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="16" x="19.685" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="17" x="22.225" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="18" x="22.225" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="19" x="24.765" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="20" x="24.765" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="21" x="27.305" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="22" x="27.305" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="23" x="29.845" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="24" x="29.845" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="25" x="32.385" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="26" x="32.385" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_EDGES_0DRILL">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+without any drill holes</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+</package>
+<package name="RASPI_BOARD_AB_THIN">
+<description>Raspberry Pi board
+ - 
+Thin version with only the width of the GPIO connector</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="51"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="51"/>
+<wire x1="31.75" y1="55.88" x2="34.29" y2="55.88" width="0.254" layer="51"/>
+<wire x1="34.29" y1="55.88" x2="34.29" y2="53.34" width="0.254" layer="51"/>
+<wire x1="31.75" y1="0" x2="34.29" y2="0" width="0.254" layer="51"/>
+<wire x1="34.29" y1="0" x2="34.29" y2="2.54" width="0.254" layer="51"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+</package>
+</packages>
+<symbols>
+<symbol name="RASPI_GPIO_AB">
+<description>Generic schematic symbol for the Raspberry Pi GPIO connector&lt;br/&gt;
+Model A / B, Revision 2 &amp;nbsp; with 6 &amp;quot;not connected&amp;quot; pins</description>
+<wire x1="-12.7" y1="25.4" x2="12.7" y2="25.4" width="0.254" layer="94"/>
+<wire x1="12.7" y1="25.4" x2="12.7" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="12.7" y1="-22.86" x2="-12.7" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="-12.7" y1="-22.86" x2="-12.7" y2="25.4" width="0.254" layer="94"/>
+<text x="13.97" y="22.86" size="1.778" layer="97" ratio="10">Raspberry Pi</text>
+<text x="13.97" y="20.32" size="1.778" layer="97" ratio="10">GPIO Port</text>
+<pin name="5V0" x="-5.08" y="27.94" length="short" direction="pwr" rot="R270"/>
+<pin name="3V3" x="5.08" y="27.94" length="short" direction="pwr" rot="R270"/>
+<pin name="GND" x="0" y="-25.4" length="short" direction="pwr" rot="R90"/>
+<pin name="SDA" x="-15.24" y="-17.78" length="short"/>
+<pin name="SCL" x="-15.24" y="-15.24" length="short"/>
+<pin name="GPIO17" x="-15.24" y="15.24" length="short"/>
+<pin name="GPIO18" x="-15.24" y="12.7" length="short"/>
+<pin name="GPIO27" x="-15.24" y="10.16" length="short"/>
+<pin name="GPIO22" x="-15.24" y="7.62" length="short"/>
+<pin name="GPIO23" x="-15.24" y="5.08" length="short"/>
+<pin name="GPIO24" x="-15.24" y="2.54" length="short"/>
+<pin name="GPIO25" x="-15.24" y="0" length="short"/>
+<pin name="GPIO04" x="-15.24" y="-2.54" length="short"/>
+<pin name="TXD" x="-15.24" y="-7.62" length="short"/>
+<pin name="RXD" x="-15.24" y="-10.16" length="short"/>
+<pin name="SPI_MOSI" x="15.24" y="15.24" length="short" rot="R180"/>
+<pin name="SPI_MISO" x="15.24" y="12.7" length="short" rot="R180"/>
+<pin name="SPI_SCLK" x="15.24" y="10.16" length="short" rot="R180"/>
+<pin name="SPI_CE0" x="15.24" y="7.62" length="short" rot="R180"/>
+<pin name="SPI_CE1" x="15.24" y="5.08" length="short" rot="R180"/>
+<pin name="N.C.0" x="15.24" y="-2.54" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.1" x="15.24" y="-5.08" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.2" x="15.24" y="-7.62" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.3" x="15.24" y="-10.16" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.4" x="15.24" y="-12.7" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.5" x="15.24" y="-15.24" length="short" direction="nc" rot="R180"/>
+<text x="13.97" y="17.78" size="1.778" layer="97" ratio="10">Mod. A / B, Rev 2</text>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="RASPI_BOARD_AB" prefix="X">
+<description>Raspberry Pi GPIO connector with markings for the outer dimensions of the Raspberry Pi board model A or B&lt;br&gt;
+with different sets of drill holes or mounting pads for model B Revision 2.0</description>
+<gates>
+<gate name="G$1" symbol="RASPI_GPIO_AB" x="0" y="0"/>
+</gates>
+<devices>
+<device name="_E2" package="RASPI_BOARD_AB_EDGES_2DRILL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_F" package="RASPI_BOARD_AB_FULL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_E1" package="RASPI_BOARD_AB_EDGES_1DRILL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_TD" package="RASPI_BOARD_AB_THIN_DRILL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_E1P" package="RASPI_BOARD_AB_EDGES_1DRILL_PAD">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_E2P" package="RASPI_BOARD_AB_EDGES_2DRILL_PAD">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_FP" package="RASPI_BOARD_AB_FULL_PAD">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_TP" package="RASPI_BOARD_AB_THIN_PAD">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_TB" package="RASPI_BOARD_AB_THIN_BOT">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_E0" package="RASPI_BOARD_AB_EDGES_0DRILL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_T" package="RASPI_BOARD_AB_THIN">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+</libraries>
+<attributes>
+</attributes>
+<variantdefs>
+</variantdefs>
+<classes>
+<class number="0" name="default" width="0" drill="0">
+</class>
+</classes>
+<parts>
+<part name="U$1" library="mcp4161" deviceset="MCP4161-XXXX/P" device=""/>
+<part name="X1" library="raspberrypi_bastelstube_v13" deviceset="RASPI_BOARD_AB" device="_F"/>
+</parts>
+<sheets>
+<sheet>
+<plain>
+</plain>
+<instances>
+<instance part="U$1" gate="A" x="58.42" y="60.96"/>
+<instance part="X1" gate="G$1" x="0" y="50.8"/>
+</instances>
+<busses>
+</busses>
+<nets>
+<net name="N$1" class="0">
+<segment>
+<pinref part="X1" gate="G$1" pin="SPI_MOSI"/>
+<pinref part="U$1" gate="A" pin="SDI/SDO"/>
+<wire x1="15.24" y1="66.04" x2="58.42" y2="66.04" width="0.1524" layer="91"/>
+<wire x1="58.42" y1="66.04" x2="58.42" y2="58.42" width="0.1524" layer="91"/>
+<pinref part="X1" gate="G$1" pin="SPI_SCLK"/>
+<wire x1="58.42" y1="58.42" x2="58.42" y2="55.88" width="0.1524" layer="91"/>
+<wire x1="58.42" y1="58.42" x2="17.78" y2="58.42" width="0.1524" layer="91"/>
+<wire x1="17.78" y1="58.42" x2="15.24" y2="60.96" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$2" class="0">
+<segment>
+<pinref part="U$1" gate="A" pin="VSS"/>
+<pinref part="X1" gate="G$1" pin="GND"/>
+<wire x1="58.42" y1="53.34" x2="27.94" y2="53.34" width="0.1524" layer="91"/>
+<wire x1="27.94" y1="53.34" x2="0" y2="25.4" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$3" class="0">
+<segment>
+<pinref part="U$1" gate="A" pin="VDD"/>
+<pinref part="X1" gate="G$1" pin="5V0"/>
+<wire x1="106.68" y1="60.96" x2="12.7" y2="60.96" width="0.1524" layer="91"/>
+<wire x1="12.7" y1="60.96" x2="-5.08" y2="78.74" width="0.1524" layer="91"/>
+</segment>
+</net>
+</nets>
+</sheet>
+</sheets>
+</schematic>
+</drawing>
+</eagle>

schematics/Timelaps/schemas.sch

@@ -0,0 +1,1613 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE eagle SYSTEM "eagle.dtd">
+<eagle version="7.3.0">
+<drawing>
+<settings>
+<setting alwaysvectorfont="no"/>
+<setting verticaltext="up"/>
+</settings>
+<grid distance="0.1" unitdist="inch" unit="inch" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
+<layers>
+<layer number="1" name="Top" color="4" fill="1" visible="no" active="no"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="no" active="no"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="no" active="no"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="no" active="no"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="no" active="no"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="no" active="no"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="no" active="no"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="no" active="no"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="no" active="no"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="no" active="no"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="no" active="no"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="no" active="no"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="no" active="no"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="no" active="no"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="no"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="no"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="no"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="no"/>
+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="no"/>
+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="no"/>
+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="no"/>
+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="no"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="no"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="no"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="no" active="no"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="no" active="no"/>
+<layer number="41" name="tRestrict" color="4" fill="10" visible="no" active="no"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="no" active="no"/>
+<layer number="43" name="vRestrict" color="2" fill="10" visible="no" active="no"/>
+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="no"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="no"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="no"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="no"/>
+<layer number="48" name="Document" color="7" fill="1" visible="no" active="no"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="no" active="no"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="no" active="no"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="no" active="no"/>
+<layer number="90" name="Modules" color="5" fill="1" visible="yes" active="yes"/>
+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="93" name="Pins" color="2" fill="1" visible="no" active="yes"/>
+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
+</layers>
+<schematic xreflabel="%F%N/%S.%C%R" xrefpart="/%S.%C%R">
+<libraries>
+<library name="mcp4161">
+<packages>
+<package name="PDIP8_300MC">
+<pad name="1" x="-7.62" y="7.62" drill="0.9906" shape="square"/>
+<pad name="2" x="-7.62" y="5.08" drill="0.9906"/>
+<pad name="3" x="-7.62" y="2.54" drill="0.9906"/>
+<pad name="4" x="-7.62" y="0" drill="0.9906"/>
+<pad name="5" x="0" y="0" drill="0.9906"/>
+<pad name="6" x="0" y="2.54" drill="0.9906"/>
+<pad name="7" x="0" y="5.08" drill="0.9906"/>
+<pad name="8" x="0" y="7.62" drill="0.9906"/>
+<wire x1="-0.254" y1="8.6614" x2="-0.254" y2="8.89" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="6.1214" x2="-0.254" y2="6.5786" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="3.5814" x2="-0.254" y2="4.0386" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="1.0414" x2="-0.254" y2="1.4986" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="-1.0414" x2="-7.366" y2="-1.27" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="-1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="-1.27" x2="-0.254" y2="-1.0414" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="8.89" x2="-7.366" y2="8.89" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="8.89" x2="-7.366" y2="8.7122" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="6.5278" x2="-7.366" y2="6.1214" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="4.0386" x2="-7.366" y2="3.5814" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="1.4986" x2="-7.366" y2="1.0414" width="0.1524" layer="51"/>
+<text x="-8.2042" y="8.4836" size="1.27" layer="51" ratio="6" rot="SR0">*</text>
+<wire x1="-7.366" y1="7.112" x2="-7.366" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="8.128" x2="-8.128" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="8.128" x2="-8.128" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="7.112" x2="-7.366" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="4.572" x2="-7.366" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="5.588" x2="-8.128" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="5.588" x2="-8.128" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="4.572" x2="-7.366" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="2.032" x2="-7.366" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="3.048" x2="-8.128" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="3.048" x2="-8.128" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="2.032" x2="-7.366" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="-0.508" x2="-7.366" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="0.508" x2="-8.128" y2="0.4826" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="0.4826" x2="-8.128" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="-0.508" x2="-7.366" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="0.508" x2="-0.254" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="-0.508" x2="0.508" y2="-0.4826" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="-0.4826" x2="0.508" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="0.508" x2="-0.254" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="3.048" x2="-0.254" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="2.032" x2="0.508" y2="2.0574" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="2.0574" x2="0.4826" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="3.048" x2="-0.254" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="5.588" x2="-0.254" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="4.572" x2="0.4826" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="4.572" x2="0.4826" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="5.588" x2="-0.254" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="8.128" x2="-0.254" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="7.112" x2="0.4826" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="7.112" x2="0.4826" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="8.128" x2="-0.254" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="-1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="-1.27" x2="-0.254" y2="8.89" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="8.89" x2="-7.366" y2="8.89" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="8.89" x2="-7.366" y2="-1.27" width="0.1524" layer="25"/>
+<text x="-8.2042" y="8.4836" size="1.27" layer="25" ratio="6" rot="SR0">*</text>
+<text x="-6.6802" y="3.175" size="1.27" layer="25" ratio="6" rot="SR0">&gt;NAME</text>
+<text x="-7.2644" y="3.175" size="1.27" layer="27" ratio="6" rot="SR0">&gt;VALUE</text>
+</package>
+</packages>
+<symbols>
+<symbol name="MCP4161-XXXX/P">
+<pin name="*CS" x="0" y="0" direction="pas"/>
+<pin name="SCK" x="0" y="-2.54" direction="pas"/>
+<pin name="SDI/SDO" x="0" y="-5.08" direction="pas"/>
+<pin name="VSS" x="0" y="-7.62" direction="pas"/>
+<pin name="P0A" x="48.26" y="-7.62" direction="pas" rot="R180"/>
+<pin name="P0W" x="48.26" y="-5.08" direction="pas" rot="R180"/>
+<pin name="P0B" x="48.26" y="-2.54" direction="pas" rot="R180"/>
+<pin name="VDD" x="48.26" y="0" direction="pas" rot="R180"/>
+<wire x1="7.62" y1="5.08" x2="7.62" y2="-12.7" width="0.1524" layer="94"/>
+<wire x1="7.62" y1="-12.7" x2="40.64" y2="-12.7" width="0.1524" layer="94"/>
+<wire x1="40.64" y1="-12.7" x2="40.64" y2="5.08" width="0.1524" layer="94"/>
+<wire x1="40.64" y1="5.08" x2="7.62" y2="5.08" width="0.1524" layer="94"/>
+<text x="19.4056" y="9.1186" size="2.0828" layer="95" ratio="6" rot="SR0">&gt;NAME</text>
+<text x="18.4658" y="6.5786" size="2.0828" layer="96" ratio="6" rot="SR0">&gt;VALUE</text>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="MCP4161-XXXX/P">
+<gates>
+<gate name="A" symbol="MCP4161-XXXX/P" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="PDIP8_300MC">
+<connects>
+<connect gate="A" pin="*CS" pad="1"/>
+<connect gate="A" pin="P0A" pad="5"/>
+<connect gate="A" pin="P0B" pad="7"/>
+<connect gate="A" pin="P0W" pad="6"/>
+<connect gate="A" pin="SCK" pad="2"/>
+<connect gate="A" pin="SDI/SDO" pad="3"/>
+<connect gate="A" pin="VDD" pad="8"/>
+<connect gate="A" pin="VSS" pad="4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="raspberrypi_bastelstube_v13">
+<description>&lt;b&gt;Raspberry Pi&lt;/b&gt; by &lt;b&gt;Martin's Bastelstube&lt;/b&gt;
+&lt;p&gt;
+Different shapes of piggyback boards for the famous &amp;amp; fabulous
+&lt;a href="http://www.raspberrypi.org/"&gt;Raspberry Pi&lt;/a&gt; computer.
+&lt;p&gt;
+The outline of the Raspberry Pi board is drawn on layer 52 bDocu, so you can make it invisible if necessary.&lt;br/&gt;
+Recommendation: Start your design with RASPI_BOARD_*_FULL, so you are aware of all the big components and
+connectors when you're drawing the dimensions of your board and placing your own components.&lt;br/&gt;
+Later, you can simply change the package of your Raspberry Pi connector to the RASPI_BOARD_*_EDGES type,
+so you can concentrate on your own design.
+&lt;p&gt;
+Most of my board packages don't have the outline drawn in layer 20 Dimension (except the HATs). This allows you to deviate from the original Raspberry Pi board shape, e.g. when you need more space behind the GPIO connector for the routing of the power supply lines. If you want to stick exactly to the Raspberry Pi board shape, then just draw the Dimension layer right on the lines in layer bDocu.
+
+&lt;hr&gt;&lt;br/&gt;
+
+Version 1.3
+&lt;ul&gt;
+&lt;li&gt;Added the shape and dimensions of the HAT board with &amp;amp; without the camera and display flex cutout&lt;/li&gt;
+&lt;li&gt;New GPIO connector version (suffix &amp;quot;#&amp;quot;) with all pins connected (no more &amp;quot;n.c.&amp;quot; pins)&lt;/li&gt;
+&lt;li&gt;Two more &amp;quot;AB-&amp;quot; boards with 5 and 6 drill holes / pads, mechanically compatible with all RasPi versions&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.2
+&lt;ul&gt;
+&lt;li&gt;Added a 26-pin GPIO connector with board dimensions of model B+&lt;br/&gt;
+       for backwards compatibility with models A and B, named &amp;quot;B-&amp;quot;&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.1
+&lt;ul&gt;
+&lt;li&gt;New GPIO connector and board dimensions of model B+&lt;/li&gt;
+&lt;li&gt;Old connector and board (for models A and B) renamed to AB&lt;/li&gt;
+&lt;li&gt;GPIO pin numbers on connector changed to match Rev2 board design&lt;/li&gt;
+&lt;/ul&gt;
+
+Version 1.0
+&lt;ul&gt;
+&lt;li&gt;More detailed descriptions for all components&lt;/li&gt;
+&lt;li&gt;Published on Cadsoft webpage&lt;/li&gt;
+&lt;/ul&gt;
+
+&lt;hr&gt;&lt;br/&gt;
+
+Designed by &lt;a href="http://bastelstube.rocci.net/"&gt;Martin's Bastelstube&lt;/a&gt;&lt;br&gt;
+Comments / complaints / bug reports / suggestions to &lt;author&gt;eightbit@web.de&lt;/author&gt;</description>
+<packages>
+<package name="RASPI_BOARD_AB_EDGES_2DRILL">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+including 2 drill holes for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<hole x="80.1" y="43.6" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+<circle x="80.1" y="43.6" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_FULL">
+<description>Raspberry Pi board, full outline with position of big connectors + components&lt;br&gt;
+including drill holes for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="0" x2="0" y2="3.81" width="0.254" layer="52"/>
+<wire x1="0" y1="3.81" x2="0" y2="11.43" width="0.254" layer="52"/>
+<wire x1="0" y1="11.43" x2="0" y2="18.0975" width="0.254" layer="52"/>
+<wire x1="0" y1="18.0975" x2="0" y2="42.2275" width="0.254" layer="52"/>
+<wire x1="0" y1="42.2275" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="60.96" y2="55.88" width="0.254" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="68.2625" y2="55.88" width="0.254" layer="52"/>
+<wire x1="68.2625" y1="55.88" x2="70.8025" y2="55.88" width="0.254" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="37.1475" y2="0" width="0.254" layer="52"/>
+<wire x1="37.1475" y1="0" x2="51.7525" y2="0" width="0.254" layer="52"/>
+<wire x1="51.7525" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="37.465" width="0.254" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="85.09" y2="24.4475" width="0.254" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="85.09" y2="17.78" width="0.254" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="85.09" y2="1.905" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="86.6775" y2="1.905" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="1.905" x2="86.6775" y2="17.78" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="17.78" x2="85.09" y2="17.78" width="0.127" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="65.405" y2="17.78" width="0.127" layer="52"/>
+<wire x1="65.405" y1="17.78" x2="65.405" y2="1.905" width="0.127" layer="52"/>
+<wire x1="65.405" y1="1.905" x2="85.09" y2="1.905" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="91.7575" y2="37.465" width="0.127" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.465" x2="91.7575" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.7825" x2="92.075" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="92.075" y1="37.7825" x2="92.075" y2="24.13" width="0.127" layer="52"/>
+<wire x1="92.075" y1="24.13" x2="91.7575" y2="24.13" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="24.13" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="74.93" y2="37.465" width="0.127" layer="52"/>
+<wire x1="74.93" y1="37.465" x2="74.93" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="74.93" y1="24.4475" x2="85.09" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="0" y1="3.81" x2="5.08" y2="3.81" width="0.127" layer="52"/>
+<wire x1="5.08" y1="3.81" x2="5.08" y2="11.43" width="0.127" layer="52"/>
+<wire x1="5.08" y1="11.43" x2="0" y2="11.43" width="0.127" layer="52"/>
+<wire x1="0" y1="11.43" x2="-0.635" y2="11.7475" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="11.7475" x2="-0.635" y2="3.4925" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="3.4925" x2="0" y2="3.81" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="-0.9525" x2="51.7525" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="-0.9525" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="11.1125" x2="51.7525" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="11.1125" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="41.275" y1="53.34" x2="42.2275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="50.4825" y1="53.34" x2="51.435" y2="53.34" width="0.127" layer="52"/>
+<wire x1="58.42" y1="55.88" x2="60.96" y2="55.88" width="0.127" layer="52"/>
+<wire x1="51.435" y1="53.34" x2="51.435" y2="43.18" width="0.127" layer="52"/>
+<wire x1="51.435" y1="43.18" x2="41.275" y2="43.18" width="0.127" layer="52"/>
+<wire x1="41.275" y1="43.18" x2="41.275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="70.8025" y2="44.45" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="44.45" x2="58.42" y2="44.45" width="0.127" layer="52"/>
+<wire x1="58.42" y1="44.45" x2="58.42" y2="55.88" width="0.127" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="60.96" y2="58.9915" width="0.127" layer="52"/>
+<wire x1="60.96" y1="58.9915" x2="61.2775" y2="59.309" width="0.127" layer="52" curve="-90"/>
+<wire x1="61.2775" y1="59.309" x2="67.945" y2="59.309" width="0.127" layer="52"/>
+<wire x1="67.945" y1="59.309" x2="68.2625" y2="58.9915" width="0.127" layer="52" curve="-90"/>
+<wire x1="68.2625" y1="58.9915" x2="68.2625" y2="55.88" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="42.2275" y2="62.23" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="62.23" x2="42.8625" y2="62.865" width="0.127" layer="52" curve="-90"/>
+<wire x1="42.8625" y1="62.865" x2="49.8475" y2="62.865" width="0.127" layer="52"/>
+<wire x1="49.8475" y1="62.865" x2="50.4825" y2="62.23" width="0.127" layer="52" curve="-90"/>
+<wire x1="50.4825" y1="62.23" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="54.61" y2="46.99" width="0.127" layer="52"/>
+<wire x1="54.61" y1="46.99" x2="54.61" y2="44.45" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="26.67" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="52.07" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="27.6225" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="57.15" y2="44.45" width="0.127" layer="52"/>
+<wire x1="57.15" y1="44.45" x2="57.15" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.15" y1="27.6225" x2="57.15" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="26.67" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.4675" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="28.2575" x2="57.4675" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="27.6225" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="51.7525" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="28.2575" x2="51.7525" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="27.6225" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="0" y1="18.0975" x2="-17.145" y2="18.0975" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="18.0975" x2="-17.4625" y2="18.415" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="18.415" x2="-17.4625" y2="41.91" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="41.91" x2="-17.145" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="42.2275" x2="0" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="5.715" y1="49.53" x2="5.715" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.715" y1="47.9425" x2="5.715" y2="44.45" width="0.127" layer="52"/>
+<wire x1="5.715" y1="44.45" x2="15.875" y2="44.45" width="0.127" layer="52"/>
+<wire x1="15.875" y1="44.45" x2="15.875" y2="49.53" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.3975" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="48.5775" x2="5.3975" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="47.9425" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<circle x="13.0175" y="6.985" radius="3.175" width="0.127" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<hole x="80.1" y="43.6" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+<circle x="80.1" y="43.6" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_EDGES_1DRILL">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+including 1 drill hole for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="80.1" y="43.6" drill="3"/>
+<circle x="80.1" y="43.6" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_THIN_DRILL">
+<description>Raspberry Pi board
+ - 
+Thin version with only the width of the GPIO connector and 1 drill hole</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="51"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="51"/>
+<wire x1="31.75" y1="55.88" x2="34.29" y2="55.88" width="0.254" layer="51"/>
+<wire x1="34.29" y1="55.88" x2="34.29" y2="53.34" width="0.254" layer="51"/>
+<wire x1="31.75" y1="0" x2="34.29" y2="0" width="0.254" layer="51"/>
+<wire x1="34.29" y1="0" x2="34.29" y2="2.54" width="0.254" layer="51"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" font="vector" ratio="10" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_EDGES_1DRILL_PAD">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+including 1 mounting pad for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<pad name="DRILL_2" x="80.1" y="43.6" drill="3" diameter="6.5"/>
+</package>
+<package name="RASPI_BOARD_AB_EDGES_2DRILL_PAD">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+including 2 mounting pads for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<pad name="DRILL_1" x="25.5" y="18" drill="3" diameter="6.5"/>
+<pad name="DRILL_2" x="80.1" y="43.6" drill="3" diameter="6.5"/>
+</package>
+<package name="RASPI_BOARD_AB_FULL_PAD">
+<description>Raspberry Pi board, full outline with position of big connectors + components&lt;br&gt;
+including mounting pads for Model B Revision 2.0</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="0" x2="0" y2="3.81" width="0.254" layer="52"/>
+<wire x1="0" y1="3.81" x2="0" y2="11.43" width="0.254" layer="52"/>
+<wire x1="0" y1="11.43" x2="0" y2="18.0975" width="0.254" layer="52"/>
+<wire x1="0" y1="18.0975" x2="0" y2="42.2275" width="0.254" layer="52"/>
+<wire x1="0" y1="42.2275" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="58.42" y2="55.88" width="0.254" layer="52"/>
+<wire x1="58.42" y1="55.88" x2="60.96" y2="55.88" width="0.254" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="68.2625" y2="55.88" width="0.254" layer="52"/>
+<wire x1="68.2625" y1="55.88" x2="70.8025" y2="55.88" width="0.254" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="37.1475" y2="0" width="0.254" layer="52"/>
+<wire x1="37.1475" y1="0" x2="51.7525" y2="0" width="0.254" layer="52"/>
+<wire x1="51.7525" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="37.465" width="0.254" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="85.09" y2="24.4475" width="0.254" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="85.09" y2="17.78" width="0.254" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="85.09" y2="1.905" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="1.905" x2="86.6775" y2="1.905" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="1.905" x2="86.6775" y2="17.78" width="0.127" layer="52"/>
+<wire x1="86.6775" y1="17.78" x2="85.09" y2="17.78" width="0.127" layer="52"/>
+<wire x1="85.09" y1="17.78" x2="65.405" y2="17.78" width="0.127" layer="52"/>
+<wire x1="65.405" y1="17.78" x2="65.405" y2="1.905" width="0.127" layer="52"/>
+<wire x1="65.405" y1="1.905" x2="85.09" y2="1.905" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="91.7575" y2="37.465" width="0.127" layer="52"/>
+<wire x1="85.09" y1="24.4475" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.465" x2="91.7575" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="37.7825" x2="92.075" y2="37.7825" width="0.127" layer="52"/>
+<wire x1="92.075" y1="37.7825" x2="92.075" y2="24.13" width="0.127" layer="52"/>
+<wire x1="92.075" y1="24.13" x2="91.7575" y2="24.13" width="0.127" layer="52"/>
+<wire x1="91.7575" y1="24.13" x2="91.7575" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="85.09" y1="37.465" x2="74.93" y2="37.465" width="0.127" layer="52"/>
+<wire x1="74.93" y1="37.465" x2="74.93" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="74.93" y1="24.4475" x2="85.09" y2="24.4475" width="0.127" layer="52"/>
+<wire x1="0" y1="3.81" x2="5.08" y2="3.81" width="0.127" layer="52"/>
+<wire x1="5.08" y1="3.81" x2="5.08" y2="11.43" width="0.127" layer="52"/>
+<wire x1="5.08" y1="11.43" x2="0" y2="11.43" width="0.127" layer="52"/>
+<wire x1="0" y1="11.43" x2="-0.635" y2="11.7475" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="11.7475" x2="-0.635" y2="3.4925" width="0.127" layer="52"/>
+<wire x1="-0.635" y1="3.4925" x2="0" y2="3.81" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="-0.9525" x2="51.7525" y2="-0.9525" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="-0.9525" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="0" x2="37.1475" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="37.1475" y1="11.1125" x2="51.7525" y2="11.1125" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="11.1125" x2="51.7525" y2="0" width="0.127" layer="52"/>
+<wire x1="41.275" y1="53.34" x2="42.2275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="50.4825" y1="53.34" x2="51.435" y2="53.34" width="0.127" layer="52"/>
+<wire x1="51.435" y1="53.34" x2="51.435" y2="43.18" width="0.127" layer="52"/>
+<wire x1="51.435" y1="43.18" x2="41.275" y2="43.18" width="0.127" layer="52"/>
+<wire x1="41.275" y1="43.18" x2="41.275" y2="53.34" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="55.88" x2="70.8025" y2="44.45" width="0.127" layer="52"/>
+<wire x1="70.8025" y1="44.45" x2="58.42" y2="44.45" width="0.127" layer="52"/>
+<wire x1="58.42" y1="44.45" x2="58.42" y2="55.88" width="0.127" layer="52"/>
+<wire x1="60.96" y1="55.88" x2="60.96" y2="58.9915" width="0.127" layer="52"/>
+<wire x1="60.96" y1="58.9915" x2="61.2775" y2="59.309" width="0.127" layer="52" curve="-90"/>
+<wire x1="61.2775" y1="59.309" x2="67.945" y2="59.309" width="0.127" layer="52"/>
+<wire x1="67.945" y1="59.309" x2="68.2625" y2="58.9915" width="0.127" layer="52" curve="-90"/>
+<wire x1="68.2625" y1="58.9915" x2="68.2625" y2="55.88" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="53.34" x2="42.2275" y2="62.23" width="0.127" layer="52"/>
+<wire x1="42.2275" y1="62.23" x2="42.8625" y2="62.865" width="0.127" layer="52" curve="-90"/>
+<wire x1="42.8625" y1="62.865" x2="49.8475" y2="62.865" width="0.127" layer="52"/>
+<wire x1="49.8475" y1="62.865" x2="50.4825" y2="62.23" width="0.127" layer="52" curve="-90"/>
+<wire x1="50.4825" y1="62.23" x2="50.4825" y2="53.34" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="54.61" y2="46.99" width="0.127" layer="52"/>
+<wire x1="54.61" y1="46.99" x2="54.61" y2="44.45" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="26.67" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="52.07" y1="46.99" x2="52.07" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="27.6225" x2="52.07" y2="26.67" width="0.127" layer="52"/>
+<wire x1="54.61" y1="44.45" x2="57.15" y2="44.45" width="0.127" layer="52"/>
+<wire x1="57.15" y1="44.45" x2="57.15" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.15" y1="27.6225" x2="57.15" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="26.67" x2="54.61" y2="26.67" width="0.127" layer="52"/>
+<wire x1="57.15" y1="28.2575" x2="57.4675" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="28.2575" x2="57.4675" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="57.4675" y1="27.6225" x2="57.15" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="52.07" y1="28.2575" x2="51.7525" y2="28.2575" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="28.2575" x2="51.7525" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="51.7525" y1="27.6225" x2="52.07" y2="27.6225" width="0.127" layer="52"/>
+<wire x1="0" y1="18.0975" x2="-17.145" y2="18.0975" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="18.0975" x2="-17.4625" y2="18.415" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="18.415" x2="-17.4625" y2="41.91" width="0.127" layer="52"/>
+<wire x1="-17.4625" y1="41.91" x2="-17.145" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="-17.145" y1="42.2275" x2="0" y2="42.2275" width="0.127" layer="52"/>
+<wire x1="5.715" y1="49.53" x2="5.715" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.715" y1="47.9425" x2="5.715" y2="44.45" width="0.127" layer="52"/>
+<wire x1="5.715" y1="44.45" x2="15.875" y2="44.45" width="0.127" layer="52"/>
+<wire x1="15.875" y1="44.45" x2="15.875" y2="49.53" width="0.127" layer="52"/>
+<wire x1="5.715" y1="48.5775" x2="5.3975" y2="48.5775" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="48.5775" x2="5.3975" y2="47.9425" width="0.127" layer="52"/>
+<wire x1="5.3975" y1="47.9425" x2="5.715" y2="47.9425" width="0.127" layer="52"/>
+<circle x="13.0175" y="6.985" radius="3.175" width="0.127" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<pad name="DRILL_1" x="25.5" y="18" drill="3" diameter="6.5"/>
+<pad name="DRILL_2" x="80.1" y="43.6" drill="3" diameter="6.5"/>
+</package>
+<package name="RASPI_BOARD_AB_THIN_PAD">
+<description>Raspberry Pi board
+ - 
+Thin version with only the width of the GPIO connector and 1 mounting pad</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="51"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="51"/>
+<wire x1="31.75" y1="55.88" x2="34.29" y2="55.88" width="0.254" layer="51"/>
+<wire x1="34.29" y1="55.88" x2="34.29" y2="53.34" width="0.254" layer="51"/>
+<wire x1="31.75" y1="0" x2="34.29" y2="0" width="0.254" layer="51"/>
+<wire x1="34.29" y1="0" x2="34.29" y2="2.54" width="0.254" layer="51"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<pad name="DRILL_1" x="25.5" y="18" drill="3" diameter="6.5"/>
+</package>
+<package name="RASPI_BOARD_AB_THIN_BOT">
+<description>Raspberry Pi board - Thin version with only the width of the GPIO connector and 1 drill hole&lt;p/&gt;
+Pads are in "Offset" shape to make them easy to solder from the bottom side&lt;br/&gt;
+for single-side PCBs</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="51"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="51"/>
+<wire x1="31.75" y1="55.88" x2="34.29" y2="55.88" width="0.254" layer="51"/>
+<wire x1="34.29" y1="55.88" x2="34.29" y2="53.34" width="0.254" layer="51"/>
+<wire x1="31.75" y1="0" x2="34.29" y2="0" width="0.254" layer="51"/>
+<wire x1="34.29" y1="0" x2="34.29" y2="2.54" width="0.254" layer="51"/>
+<pad name="1" x="1.905" y="50.8" drill="0.8" diameter="1.778" shape="offset" rot="R270"/>
+<pad name="2" x="1.905" y="53.34" drill="0.8" diameter="1.778" shape="offset" rot="R90"/>
+<pad name="3" x="4.445" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="4" x="4.445" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="5" x="6.985" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="6" x="6.985" y="53.34" drill="0.8" diameter="1.778" shape="offset" rot="R90"/>
+<pad name="7" x="9.525" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="8" x="9.525" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="9" x="12.065" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="10" x="12.065" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="11" x="14.605" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="12" x="14.605" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="13" x="17.145" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="14" x="17.145" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="15" x="19.685" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="16" x="19.685" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="17" x="22.225" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="18" x="22.225" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="19" x="24.765" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="20" x="24.765" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="21" x="27.305" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="22" x="27.305" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="23" x="29.845" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="24" x="29.845" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<pad name="25" x="32.385" y="50.8" drill="0.8" diameter="1.4224" shape="offset" rot="R270"/>
+<pad name="26" x="32.385" y="53.34" drill="0.8" diameter="1.6764" shape="offset" rot="R90"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+<hole x="25.5" y="18" drill="3"/>
+<circle x="25.5" y="18" radius="3.25" width="0.127" layer="52"/>
+</package>
+<package name="RASPI_BOARD_AB_EDGES_0DRILL">
+<description>Raspberry Pi board model A / B, outline is only marked by its edges&lt;br&gt;
+without any drill holes</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="52"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="52"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="52"/>
+<wire x1="82.55" y1="55.88" x2="85.09" y2="55.88" width="0.254" layer="52"/>
+<wire x1="85.09" y1="55.88" x2="85.09" y2="53.34" width="0.254" layer="52"/>
+<wire x1="82.55" y1="0" x2="85.09" y2="0" width="0.254" layer="52"/>
+<wire x1="85.09" y1="0" x2="85.09" y2="2.54" width="0.254" layer="52"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+</package>
+<package name="RASPI_BOARD_AB_THIN">
+<description>Raspberry Pi board
+ - 
+Thin version with only the width of the GPIO connector</description>
+<wire x1="0.635" y1="54.61" x2="0.635" y2="52.07" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="54.61" x2="33.655" y2="54.61" width="0.127" layer="21"/>
+<wire x1="33.655" y1="54.61" x2="33.655" y2="49.53" width="0.127" layer="21"/>
+<wire x1="33.655" y1="49.53" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="3.175" y1="49.53" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.53" x2="1.5875" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="0.635" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0.635" y1="52.07" x2="3.175" y2="52.07" width="0.127" layer="21"/>
+<wire x1="3.175" y1="52.07" x2="3.175" y2="49.53" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.53" x2="1.5875" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="1.5875" y1="49.2125" x2="2.2225" y2="49.2125" width="0.127" layer="21"/>
+<wire x1="2.2225" y1="49.2125" x2="2.2225" y2="49.53" width="0.127" layer="21"/>
+<wire x1="0" y1="2.54" x2="0" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="0" x2="2.54" y2="0" width="0.254" layer="51"/>
+<wire x1="0" y1="53.34" x2="0" y2="55.88" width="0.254" layer="51"/>
+<wire x1="0" y1="55.88" x2="2.54" y2="55.88" width="0.254" layer="51"/>
+<wire x1="31.75" y1="55.88" x2="34.29" y2="55.88" width="0.254" layer="51"/>
+<wire x1="34.29" y1="55.88" x2="34.29" y2="53.34" width="0.254" layer="51"/>
+<wire x1="31.75" y1="0" x2="34.29" y2="0" width="0.254" layer="51"/>
+<wire x1="34.29" y1="0" x2="34.29" y2="2.54" width="0.254" layer="51"/>
+<pad name="1" x="1.905" y="50.8" drill="1" diameter="1.778" shape="square"/>
+<pad name="2" x="1.905" y="53.34" drill="1" diameter="1.778"/>
+<pad name="3" x="4.445" y="50.8" drill="1" diameter="1.778"/>
+<pad name="4" x="4.445" y="53.34" drill="1" diameter="1.778"/>
+<pad name="5" x="6.985" y="50.8" drill="1" diameter="1.778"/>
+<pad name="6" x="6.985" y="53.34" drill="1" diameter="1.778"/>
+<pad name="7" x="9.525" y="50.8" drill="1" diameter="1.778"/>
+<pad name="8" x="9.525" y="53.34" drill="1" diameter="1.778"/>
+<pad name="9" x="12.065" y="50.8" drill="1" diameter="1.778"/>
+<pad name="10" x="12.065" y="53.34" drill="1" diameter="1.778"/>
+<pad name="11" x="14.605" y="50.8" drill="1" diameter="1.778"/>
+<pad name="12" x="14.605" y="53.34" drill="1" diameter="1.778"/>
+<pad name="13" x="17.145" y="50.8" drill="1" diameter="1.778"/>
+<pad name="14" x="17.145" y="53.34" drill="1" diameter="1.778"/>
+<pad name="15" x="19.685" y="50.8" drill="1" diameter="1.778"/>
+<pad name="16" x="19.685" y="53.34" drill="1" diameter="1.778"/>
+<pad name="17" x="22.225" y="50.8" drill="1" diameter="1.778"/>
+<pad name="18" x="22.225" y="53.34" drill="1" diameter="1.778"/>
+<pad name="19" x="24.765" y="50.8" drill="1" diameter="1.778"/>
+<pad name="20" x="24.765" y="53.34" drill="1" diameter="1.778"/>
+<pad name="21" x="27.305" y="50.8" drill="1" diameter="1.778"/>
+<pad name="22" x="27.305" y="53.34" drill="1" diameter="1.778"/>
+<pad name="23" x="29.845" y="50.8" drill="1" diameter="1.778"/>
+<pad name="24" x="29.845" y="53.34" drill="1" diameter="1.778"/>
+<pad name="25" x="32.385" y="50.8" drill="1" diameter="1.778"/>
+<pad name="26" x="32.385" y="53.34" drill="1" diameter="1.778"/>
+<text x="1.5875" y="47.9425" size="1.016" layer="21" rot="SR0">1</text>
+</package>
+</packages>
+<symbols>
+<symbol name="RASPI_GPIO_AB">
+<description>Generic schematic symbol for the Raspberry Pi GPIO connector&lt;br/&gt;
+Model A / B, Revision 2 &amp;nbsp; with 6 &amp;quot;not connected&amp;quot; pins</description>
+<wire x1="-12.7" y1="25.4" x2="12.7" y2="25.4" width="0.254" layer="94"/>
+<wire x1="12.7" y1="25.4" x2="12.7" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="12.7" y1="-22.86" x2="-12.7" y2="-22.86" width="0.254" layer="94"/>
+<wire x1="-12.7" y1="-22.86" x2="-12.7" y2="25.4" width="0.254" layer="94"/>
+<text x="13.97" y="22.86" size="1.778" layer="97" ratio="10">Raspberry Pi</text>
+<text x="13.97" y="20.32" size="1.778" layer="97" ratio="10">GPIO Port</text>
+<pin name="5V0" x="-5.08" y="27.94" length="short" direction="pwr" rot="R270"/>
+<pin name="3V3" x="5.08" y="27.94" length="short" direction="pwr" rot="R270"/>
+<pin name="GND" x="0" y="-25.4" length="short" direction="pwr" rot="R90"/>
+<pin name="SDA" x="-15.24" y="-17.78" length="short"/>
+<pin name="SCL" x="-15.24" y="-15.24" length="short"/>
+<pin name="GPIO17" x="-15.24" y="15.24" length="short"/>
+<pin name="GPIO18" x="-15.24" y="12.7" length="short"/>
+<pin name="GPIO27" x="-15.24" y="10.16" length="short"/>
+<pin name="GPIO22" x="-15.24" y="7.62" length="short"/>
+<pin name="GPIO23" x="-15.24" y="5.08" length="short"/>
+<pin name="GPIO24" x="-15.24" y="2.54" length="short"/>
+<pin name="GPIO25" x="-15.24" y="0" length="short"/>
+<pin name="GPIO04" x="-15.24" y="-2.54" length="short"/>
+<pin name="TXD" x="-15.24" y="-7.62" length="short"/>
+<pin name="RXD" x="-15.24" y="-10.16" length="short"/>
+<pin name="SPI_MOSI" x="15.24" y="15.24" length="short" rot="R180"/>
+<pin name="SPI_MISO" x="15.24" y="12.7" length="short" rot="R180"/>
+<pin name="SPI_SCLK" x="15.24" y="10.16" length="short" rot="R180"/>
+<pin name="SPI_CE0" x="15.24" y="7.62" length="short" rot="R180"/>
+<pin name="SPI_CE1" x="15.24" y="5.08" length="short" rot="R180"/>
+<pin name="N.C.0" x="15.24" y="-2.54" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.1" x="15.24" y="-5.08" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.2" x="15.24" y="-7.62" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.3" x="15.24" y="-10.16" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.4" x="15.24" y="-12.7" length="short" direction="nc" rot="R180"/>
+<pin name="N.C.5" x="15.24" y="-15.24" length="short" direction="nc" rot="R180"/>
+<text x="13.97" y="17.78" size="1.778" layer="97" ratio="10">Mod. A / B, Rev 2</text>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="RASPI_BOARD_AB" prefix="X">
+<description>Raspberry Pi GPIO connector with markings for the outer dimensions of the Raspberry Pi board model A or B&lt;br&gt;
+with different sets of drill holes or mounting pads for model B Revision 2.0</description>
+<gates>
+<gate name="G$1" symbol="RASPI_GPIO_AB" x="0" y="0"/>
+</gates>
+<devices>
+<device name="_E2" package="RASPI_BOARD_AB_EDGES_2DRILL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_F" package="RASPI_BOARD_AB_FULL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_E1" package="RASPI_BOARD_AB_EDGES_1DRILL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_TD" package="RASPI_BOARD_AB_THIN_DRILL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_E1P" package="RASPI_BOARD_AB_EDGES_1DRILL_PAD">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_E2P" package="RASPI_BOARD_AB_EDGES_2DRILL_PAD">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_FP" package="RASPI_BOARD_AB_FULL_PAD">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_TP" package="RASPI_BOARD_AB_THIN_PAD">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_TB" package="RASPI_BOARD_AB_THIN_BOT">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_E0" package="RASPI_BOARD_AB_EDGES_0DRILL">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="_T" package="RASPI_BOARD_AB_THIN">
+<connects>
+<connect gate="G$1" pin="3V3" pad="1"/>
+<connect gate="G$1" pin="5V0" pad="2"/>
+<connect gate="G$1" pin="GND" pad="6"/>
+<connect gate="G$1" pin="GPIO04" pad="7"/>
+<connect gate="G$1" pin="GPIO17" pad="11"/>
+<connect gate="G$1" pin="GPIO18" pad="12"/>
+<connect gate="G$1" pin="GPIO22" pad="15"/>
+<connect gate="G$1" pin="GPIO23" pad="16"/>
+<connect gate="G$1" pin="GPIO24" pad="18"/>
+<connect gate="G$1" pin="GPIO25" pad="22"/>
+<connect gate="G$1" pin="GPIO27" pad="13"/>
+<connect gate="G$1" pin="N.C.0" pad="4"/>
+<connect gate="G$1" pin="N.C.1" pad="9"/>
+<connect gate="G$1" pin="N.C.2" pad="14"/>
+<connect gate="G$1" pin="N.C.3" pad="17"/>
+<connect gate="G$1" pin="N.C.4" pad="20"/>
+<connect gate="G$1" pin="N.C.5" pad="25"/>
+<connect gate="G$1" pin="RXD" pad="10"/>
+<connect gate="G$1" pin="SCL" pad="5"/>
+<connect gate="G$1" pin="SDA" pad="3"/>
+<connect gate="G$1" pin="SPI_CE0" pad="24"/>
+<connect gate="G$1" pin="SPI_CE1" pad="26"/>
+<connect gate="G$1" pin="SPI_MISO" pad="21"/>
+<connect gate="G$1" pin="SPI_MOSI" pad="19"/>
+<connect gate="G$1" pin="SPI_SCLK" pad="23"/>
+<connect gate="G$1" pin="TXD" pad="8"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+<library name="con-berg">
+<description>&lt;b&gt;Berg Connectors&lt;/b&gt;&lt;p&gt;
+Based on  the following source:
+&lt;ul&gt;
+&lt;li&gt;http://catalog.fciconnect.com
+&lt;/ul&gt;
+&lt;author&gt;Created by librarian@cadsoft.de&lt;/author&gt;</description>
+<packages>
+<package name="PN87520">
+<description>&lt;b&gt;USB connector&lt;/b&gt;</description>
+<wire x1="-7.4" y1="-10.19" x2="7.4" y2="-10.19" width="0.254" layer="21"/>
+<wire x1="7.4" y1="-10.19" x2="7.4" y2="4.11" width="0.254" layer="21"/>
+<wire x1="7.4" y1="4.11" x2="-7.4" y2="4.11" width="0.254" layer="21"/>
+<wire x1="-7.4" y1="4.11" x2="-7.4" y2="-10.19" width="0.254" layer="21"/>
+<wire x1="-5.08" y1="-2.87" x2="-3.81" y2="-8.72" width="0.1524" layer="21"/>
+<wire x1="-3.81" y1="-8.72" x2="-2.54" y2="-8.72" width="0.1524" layer="21"/>
+<wire x1="-2.54" y1="-8.72" x2="-1.27" y2="-2.87" width="0.1524" layer="21"/>
+<wire x1="1.27" y1="-2.87" x2="2.54" y2="-8.72" width="0.1524" layer="21"/>
+<wire x1="2.54" y1="-8.72" x2="3.81" y2="-8.72" width="0.1524" layer="21"/>
+<wire x1="3.81" y1="-8.72" x2="5.08" y2="-2.87" width="0.1524" layer="21"/>
+<wire x1="-2.46" y1="-0.1" x2="-2.46" y2="0.9" width="0.0508" layer="21" curve="180"/>
+<wire x1="-2.46" y1="-1.1" x2="-2.46" y2="-0.1" width="0.0508" layer="21" curve="180"/>
+<wire x1="3.665" y1="0.4" x2="3.665" y2="-0.6" width="0.0508" layer="21" curve="180"/>
+<wire x1="3.415" y1="0.9" x2="3.415" y2="-1.1" width="0.0508" layer="21" curve="180"/>
+<wire x1="3.665" y1="0.4" x2="4.165" y2="0.4" width="0.0508" layer="21" curve="-15.189287"/>
+<wire x1="3.415" y1="0.9" x2="4.175" y2="0.845" width="0.0508" layer="21" curve="-12.05913"/>
+<wire x1="3.415" y1="-1.1" x2="4.165" y2="-0.975" width="0.0508" layer="21" curve="18.422836"/>
+<wire x1="1.665" y1="-0.35" x2="1.665" y2="0.9" width="0.0508" layer="21" curve="180"/>
+<wire x1="1.29" y1="0.025" x2="1.29" y2="0.4" width="0.0508" layer="21" curve="180"/>
+<wire x1="-3.835" y1="0.9" x2="-3.835" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-3.835" y1="-1.1" x2="-3.21" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="-1.1" x2="-3.21" y2="-0.1" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="-0.1" x2="-3.21" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="0.9" x2="-3.835" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="0.9" x2="-2.46" y2="0.4" width="0.0508" layer="21"/>
+<wire x1="-2.46" y1="0.4" x2="-3.21" y2="-0.1" width="0.0508" layer="21"/>
+<wire x1="-3.21" y1="-0.1" x2="-2.46" y2="-0.6" width="0.0508" layer="21"/>
+<wire x1="-2.46" y1="-0.6" x2="-3.21" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-2.46" y1="-1.1" x2="-3.21" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-2.46" y1="0.9" x2="-3.21" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="-1.71" y1="0.9" x2="-1.71" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="-1.71" y1="-1.1" x2="0.04" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="-1.1" x2="0.04" y2="-0.6" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="-0.6" x2="-1.085" y2="-0.6" width="0.0508" layer="21"/>
+<wire x1="-1.085" y1="-0.6" x2="-1.085" y2="-0.35" width="0.0508" layer="21"/>
+<wire x1="-1.085" y1="-0.35" x2="0.04" y2="-0.35" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="-0.35" x2="0.04" y2="0.15" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="0.15" x2="-1.085" y2="0.15" width="0.0508" layer="21"/>
+<wire x1="-1.085" y1="0.15" x2="-1.085" y2="0.4" width="0.0508" layer="21"/>
+<wire x1="-1.085" y1="0.4" x2="0.04" y2="0.4" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="0.4" x2="0.04" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="0.04" y1="0.9" x2="-1.71" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="0.29" y1="0.9" x2="0.29" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="0.29" y1="-1.1" x2="0.915" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="-1.1" x2="0.915" y2="-0.35" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="-0.35" x2="1.415" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="1.415" y1="-1.1" x2="2.165" y2="-1.1" width="0.0508" layer="21"/>
+<wire x1="2.165" y1="-1.1" x2="1.665" y2="-0.35" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="0.4" x2="0.915" y2="0.025" width="0.0508" layer="21"/>
+<wire x1="0.29" y1="0.9" x2="1.665" y2="0.9" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="0.4" x2="1.29" y2="0.4" width="0.0508" layer="21"/>
+<wire x1="0.915" y1="0.025" x2="1.29" y2="0.025" width="0.0508" layer="21"/>
+<wire x1="3.665" y1="-0.1" x2="4.165" y2="-0.1" width="0.0508" layer="21"/>
+<wire x1="3.665" y1="-0.1" x2="3.665" y2="-0.6" width="0.0508" layer="21"/>
+<wire x1="4.16" y1="0.4" x2="4.16" y2="0.845" width="0.0508" layer="21"/>
+<wire x1="4.165" y1="-0.1" x2="4.165" y2="-0.975" width="0.0508" layer="21"/>
+<pad name="2" x="-1" y="2.71" drill="0.95" shape="long" rot="R90"/>
+<pad name="3" x="1" y="2.71" drill="0.95" shape="long" rot="R90"/>
+<pad name="1" x="-3.5" y="2.71" drill="0.95" shape="long" rot="R90"/>
+<pad name="4" x="3.5" y="2.71" drill="0.95" shape="long" rot="R90"/>
+<text x="-7.62" y="5.08" size="1.27" layer="25">&gt;NAME</text>
+<text x="9.144" y="-10.16" size="1.27" layer="27" rot="R90">&gt;VALUE</text>
+<text x="-3.81" y="-2.04" size="0.4064" layer="21">E L E C T R O N I C S</text>
+<hole x="-6.57" y="0" drill="2.3"/>
+<hole x="6.57" y="0" drill="2.3"/>
+</package>
+</packages>
+<symbols>
+<symbol name="J11">
+<wire x1="0" y1="7.62" x2="0" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="0" y1="-5.08" x2="5.08" y2="-5.08" width="0.254" layer="94"/>
+<wire x1="0" y1="7.62" x2="5.08" y2="7.62" width="0.254" layer="94"/>
+<text x="0" y="8.89" size="1.778" layer="95">&gt;NAME</text>
+<text x="0" y="-7.62" size="1.778" layer="96">&gt;VALUE</text>
+<text x="5.08" y="-2.54" size="2.54" layer="94" rot="R90">USB</text>
+<pin name="1" x="-2.54" y="5.08" visible="pad" length="short" direction="pas"/>
+<pin name="2" x="-2.54" y="2.54" visible="pad" length="short" direction="pas"/>
+<pin name="3" x="-2.54" y="0" visible="pad" length="short" direction="pas"/>
+<pin name="4" x="-2.54" y="-2.54" visible="pad" length="short" direction="pas"/>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="PN87520" prefix="X" uservalue="yes">
+<description>&lt;b&gt;BERG&lt;/b&gt; USB connector</description>
+<gates>
+<gate name="G$1" symbol="J11" x="-2.54" y="0"/>
+</gates>
+<devices>
+<device name="" package="PN87520">
+<connects>
+<connect gate="G$1" pin="1" pad="1"/>
+<connect gate="G$1" pin="2" pad="2"/>
+<connect gate="G$1" pin="3" pad="3"/>
+<connect gate="G$1" pin="4" pad="4"/>
+</connects>
+<technologies>
+<technology name="">
+<attribute name="MF" value="" constant="no"/>
+<attribute name="MPN" value="" constant="no"/>
+<attribute name="OC_FARNELL" value="unknown" constant="no"/>
+<attribute name="OC_NEWARK" value="unknown" constant="no"/>
+</technology>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+</libraries>
+<attributes>
+</attributes>
+<variantdefs>
+</variantdefs>
+<classes>
+<class number="0" name="default" width="0" drill="0">
+</class>
+</classes>
+<parts>
+<part name="U$1" library="mcp4161" deviceset="MCP4161-XXXX/P" device=""/>
+<part name="X1" library="raspberrypi_bastelstube_v13" deviceset="RASPI_BOARD_AB" device="_F"/>
+<part name="X2" library="con-berg" deviceset="PN87520" device=""/>
+</parts>
+<sheets>
+<sheet>
+<plain>
+</plain>
+<instances>
+<instance part="U$1" gate="A" x="58.42" y="48.26"/>
+<instance part="X1" gate="G$1" x="0" y="50.8"/>
+<instance part="X2" gate="G$1" x="124.46" y="40.64"/>
+</instances>
+<busses>
+</busses>
+<nets>
+<net name="N$2" class="0">
+<segment>
+<pinref part="U$1" gate="A" pin="VSS"/>
+<pinref part="X1" gate="G$1" pin="GND"/>
+<wire x1="58.42" y1="40.64" x2="58.42" y2="25.4" width="0.1524" layer="91"/>
+<wire x1="58.42" y1="25.4" x2="0" y2="25.4" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$3" class="0">
+<segment>
+<pinref part="U$1" gate="A" pin="VDD"/>
+<pinref part="X1" gate="G$1" pin="5V0"/>
+<wire x1="106.68" y1="48.26" x2="106.68" y2="83.82" width="0.1524" layer="91"/>
+<wire x1="106.68" y1="83.82" x2="-5.08" y2="83.82" width="0.1524" layer="91"/>
+<wire x1="-5.08" y1="83.82" x2="-5.08" y2="78.74" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$1" class="0">
+<segment>
+<pinref part="X1" gate="G$1" pin="SPI_MOSI"/>
+<wire x1="15.24" y1="66.04" x2="40.64" y2="66.04" width="0.1524" layer="91"/>
+<wire x1="40.64" y1="66.04" x2="40.64" y2="43.18" width="0.1524" layer="91"/>
+<pinref part="U$1" gate="A" pin="SDI/SDO"/>
+<wire x1="40.64" y1="43.18" x2="58.42" y2="43.18" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$4" class="0">
+<segment>
+<pinref part="X1" gate="G$1" pin="SPI_SCLK"/>
+<wire x1="15.24" y1="60.96" x2="43.18" y2="60.96" width="0.1524" layer="91"/>
+<wire x1="43.18" y1="60.96" x2="43.18" y2="45.72" width="0.1524" layer="91"/>
+<pinref part="U$1" gate="A" pin="SCK"/>
+<wire x1="43.18" y1="45.72" x2="58.42" y2="45.72" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$5" class="0">
+<segment>
+<pinref part="U$1" gate="A" pin="P0B"/>
+<pinref part="X2" gate="G$1" pin="1"/>
+<wire x1="106.68" y1="45.72" x2="121.92" y2="45.72" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$6" class="0">
+<segment>
+<pinref part="U$1" gate="A" pin="P0A"/>
+<wire x1="106.68" y1="40.64" x2="111.76" y2="40.64" width="0.1524" layer="91"/>
+<wire x1="111.76" y1="40.64" x2="111.76" y2="38.1" width="0.1524" layer="91"/>
+<pinref part="X2" gate="G$1" pin="4"/>
+<wire x1="111.76" y1="38.1" x2="121.92" y2="38.1" width="0.1524" layer="91"/>
+</segment>
+</net>
+<net name="N$7" class="0">
+<segment>
+<pinref part="X1" gate="G$1" pin="SPI_CE0"/>
+<wire x1="15.24" y1="58.42" x2="45.72" y2="58.42" width="0.1524" layer="91"/>
+<wire x1="45.72" y1="58.42" x2="45.72" y2="48.26" width="0.1524" layer="91"/>
+<pinref part="U$1" gate="A" pin="*CS"/>
+<wire x1="45.72" y1="48.26" x2="58.42" y2="48.26" width="0.1524" layer="91"/>
+</segment>
+</net>
+</nets>
+</sheet>
+</sheets>
+</schematic>
+</drawing>
+</eagle>

schematics/mcp4161.lbr

@@ -0,0 +1,167 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!DOCTYPE eagle SYSTEM "eagle.dtd">
+<eagle version="7.3.0">
+<drawing>
+<settings>
+<setting alwaysvectorfont="no"/>
+<setting verticaltext="up"/>
+</settings>
+<grid distance="0.1" unitdist="inch" unit="mil" style="lines" multiple="1" display="no" altdistance="0.01" altunitdist="inch" altunit="inch"/>
+<layers>
+<layer number="1" name="Top" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="16" name="Bottom" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="17" name="Pads" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="18" name="Vias" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="19" name="Unrouted" color="6" fill="1" visible="yes" active="yes"/>
+<layer number="20" name="Dimension" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="21" name="tPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="22" name="bPlace" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="23" name="tOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="24" name="bOrigins" color="15" fill="1" visible="yes" active="yes"/>
+<layer number="25" name="tNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="26" name="bNames" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="27" name="tValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="28" name="bValues" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="29" name="tStop" color="7" fill="3" visible="no" active="yes"/>
+<layer number="30" name="bStop" color="7" fill="6" visible="no" active="yes"/>
+<layer number="31" name="tCream" color="7" fill="4" visible="no" active="yes"/>
+<layer number="32" name="bCream" color="7" fill="5" visible="no" active="yes"/>
+<layer number="33" name="tFinish" color="6" fill="3" visible="no" active="yes"/>
+<layer number="34" name="bFinish" color="6" fill="6" visible="no" active="yes"/>
+<layer number="35" name="tGlue" color="7" fill="4" visible="no" active="yes"/>
+<layer number="36" name="bGlue" color="7" fill="5" visible="no" active="yes"/>
+<layer number="37" name="tTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="38" name="bTest" color="7" fill="1" visible="no" active="yes"/>
+<layer number="39" name="tKeepout" color="4" fill="11" visible="yes" active="yes"/>
+<layer number="40" name="bKeepout" color="1" fill="11" visible="yes" active="yes"/>
+<layer number="41" name="tRestrict" color="4" fill="10" visible="yes" active="yes"/>
+<layer number="42" name="bRestrict" color="1" fill="10" visible="yes" active="yes"/>
+<layer number="43" name="vRestrict" color="2" fill="10" visible="yes" active="yes"/>
+<layer number="44" name="Drills" color="7" fill="1" visible="no" active="yes"/>
+<layer number="45" name="Holes" color="7" fill="1" visible="no" active="yes"/>
+<layer number="46" name="Milling" color="3" fill="1" visible="no" active="yes"/>
+<layer number="47" name="Measures" color="7" fill="1" visible="no" active="yes"/>
+<layer number="48" name="Document" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="49" name="Reference" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="51" name="tDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="52" name="bDocu" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="90" name="Modules" color="5" fill="1" visible="yes" active="yes"/>
+<layer number="91" name="Nets" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="92" name="Busses" color="1" fill="1" visible="yes" active="yes"/>
+<layer number="93" name="Pins" color="2" fill="1" visible="yes" active="yes"/>
+<layer number="94" name="Symbols" color="4" fill="1" visible="yes" active="yes"/>
+<layer number="95" name="Names" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="96" name="Values" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="97" name="Info" color="7" fill="1" visible="yes" active="yes"/>
+<layer number="98" name="Guide" color="6" fill="1" visible="yes" active="yes"/>
+</layers>
+<library>
+<packages>
+<package name="PDIP8_300MC">
+<pad name="1" x="-7.62" y="7.62" drill="0.9906" shape="square"/>
+<pad name="2" x="-7.62" y="5.08" drill="0.9906"/>
+<pad name="3" x="-7.62" y="2.54" drill="0.9906"/>
+<pad name="4" x="-7.62" y="0" drill="0.9906"/>
+<pad name="5" x="0" y="0" drill="0.9906"/>
+<pad name="6" x="0" y="2.54" drill="0.9906"/>
+<pad name="7" x="0" y="5.08" drill="0.9906"/>
+<pad name="8" x="0" y="7.62" drill="0.9906"/>
+<wire x1="-0.254" y1="8.6614" x2="-0.254" y2="8.89" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="6.1214" x2="-0.254" y2="6.5786" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="3.5814" x2="-0.254" y2="4.0386" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="1.0414" x2="-0.254" y2="1.4986" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="-1.0414" x2="-7.366" y2="-1.27" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="-1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="-1.27" x2="-0.254" y2="-1.0414" width="0.1524" layer="51"/>
+<wire x1="-0.254" y1="8.89" x2="-7.366" y2="8.89" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="8.89" x2="-7.366" y2="8.7122" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="6.5278" x2="-7.366" y2="6.1214" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="4.0386" x2="-7.366" y2="3.5814" width="0.1524" layer="51"/>
+<wire x1="-7.366" y1="1.4986" x2="-7.366" y2="1.0414" width="0.1524" layer="51"/>
+<text x="-8.2042" y="8.4836" size="1.27" layer="51" ratio="6" rot="SR0">*</text>
+<wire x1="-7.366" y1="7.112" x2="-7.366" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="8.128" x2="-8.128" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="8.128" x2="-8.128" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="7.112" x2="-7.366" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="4.572" x2="-7.366" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="5.588" x2="-8.128" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="5.588" x2="-8.128" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="4.572" x2="-7.366" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="2.032" x2="-7.366" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="3.048" x2="-8.128" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="3.048" x2="-8.128" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="2.032" x2="-7.366" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="-0.508" x2="-7.366" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="0.508" x2="-8.128" y2="0.4826" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="0.4826" x2="-8.128" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-8.128" y1="-0.508" x2="-7.366" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="0.508" x2="-0.254" y2="-0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="-0.508" x2="0.508" y2="-0.4826" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="-0.4826" x2="0.508" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="0.508" x2="-0.254" y2="0.508" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="3.048" x2="-0.254" y2="2.032" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="2.032" x2="0.508" y2="2.0574" width="0.1524" layer="25"/>
+<wire x1="0.508" y1="2.0574" x2="0.4826" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="3.048" x2="-0.254" y2="3.048" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="5.588" x2="-0.254" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="4.572" x2="0.4826" y2="4.572" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="4.572" x2="0.4826" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="5.588" x2="-0.254" y2="5.588" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="8.128" x2="-0.254" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="7.112" x2="0.4826" y2="7.112" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="7.112" x2="0.4826" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="0.4826" y1="8.128" x2="-0.254" y2="8.128" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="-1.27" x2="-0.254" y2="-1.27" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="-1.27" x2="-0.254" y2="8.89" width="0.1524" layer="25"/>
+<wire x1="-0.254" y1="8.89" x2="-7.366" y2="8.89" width="0.1524" layer="25"/>
+<wire x1="-7.366" y1="8.89" x2="-7.366" y2="-1.27" width="0.1524" layer="25"/>
+<text x="-8.2042" y="8.4836" size="1.27" layer="25" ratio="6" rot="SR0">*</text>
+<text x="-6.6802" y="3.175" size="1.27" layer="25" ratio="6" rot="SR0">&gt;NAME</text>
+<text x="-7.2644" y="3.175" size="1.27" layer="27" ratio="6" rot="SR0">&gt;VALUE</text>
+</package>
+</packages>
+<symbols>
+<symbol name="MCP4161-XXXX/P">
+<pin name="*CS" x="0" y="0" direction="pas"/>
+<pin name="SCK" x="0" y="-2.54" direction="pas"/>
+<pin name="SDI/SDO" x="0" y="-5.08" direction="pas"/>
+<pin name="VSS" x="0" y="-7.62" direction="pas"/>
+<pin name="P0A" x="48.26" y="-7.62" direction="pas" rot="R180"/>
+<pin name="P0W" x="48.26" y="-5.08" direction="pas" rot="R180"/>
+<pin name="P0B" x="48.26" y="-2.54" direction="pas" rot="R180"/>
+<pin name="VDD" x="48.26" y="0" direction="pas" rot="R180"/>
+<wire x1="7.62" y1="5.08" x2="7.62" y2="-12.7" width="0.1524" layer="94"/>
+<wire x1="7.62" y1="-12.7" x2="40.64" y2="-12.7" width="0.1524" layer="94"/>
+<wire x1="40.64" y1="-12.7" x2="40.64" y2="5.08" width="0.1524" layer="94"/>
+<wire x1="40.64" y1="5.08" x2="7.62" y2="5.08" width="0.1524" layer="94"/>
+<text x="19.4056" y="9.1186" size="2.0828" layer="95" ratio="6" rot="SR0">&gt;NAME</text>
+<text x="18.4658" y="6.5786" size="2.0828" layer="96" ratio="6" rot="SR0">&gt;VALUE</text>
+</symbol>
+</symbols>
+<devicesets>
+<deviceset name="MCP4161-XXXX/P">
+<gates>
+<gate name="A" symbol="MCP4161-XXXX/P" x="0" y="0"/>
+</gates>
+<devices>
+<device name="" package="PDIP8_300MC">
+<connects>
+<connect gate="A" pin="*CS" pad="1"/>
+<connect gate="A" pin="P0A" pad="5"/>
+<connect gate="A" pin="P0B" pad="7"/>
+<connect gate="A" pin="P0W" pad="6"/>
+<connect gate="A" pin="SCK" pad="2"/>
+<connect gate="A" pin="SDI/SDO" pad="3"/>
+<connect gate="A" pin="VDD" pad="8"/>
+<connect gate="A" pin="VSS" pad="4"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
+</devicesets>
+</library>
+</drawing>
+</eagle>